1stly, where do i get PVC tyres in the UK
2ndly, are harder springs, aka a pretty hard set up good for drifing
3rdly, is a tamiya black, sport tuned, can good for drifting?,
and
4thly, what tyres do real cars use for drifting?

thanks guys, also sorry for the completely NOOB questions

Well for number one, are there any home depots or Lowes in the UK? if so, you can buy a short piece of pvc or abs and cut 4 pieces or watever for tires.

real drift cars use actual street tires
their is no special drift tire for actual cars
they use horsepower and torque to get them to slide

check ebay for drift abs tyres m8 cheap £5.00 for 4
and yes that motor would be good for drifting

Talking about tires....

I rocked on down to the local Mitre 10 (biggest home depot store in Auckland), and they didn't have any piping that fits! The closest piping was about 3mm out each side!

The only way I could do it was to buy piping joints and cut them up, which would cost over 16 bucks. What a RIP.

check these luke like the ones i bought
[link=http://cgi.ebay.co.uk/RC-Drift-wheels-for-Tamiya-Kyosho-Yokomo-Mugen-Losi-Hpi_W0QQitemZ260165011767QQihZ016QQcategoryZ34063Q QssPageNameZWDVWQQrdZ1QQcmdZViewItem]drift wheels[/link]

cheers m8