Its ALIVE!!!!
05-02-2008 | 08:21 PM
#1
Thread Starter
Senior Member
Joined: Feb 2007
Posts: 2,071
Likes: 0
Received 0 Likes
on
0 Posts
From: , AUSTRALIA
Its ALIVE!!!!
YEEEEHHHAAAA!!!!!
Its Alive !
I used my TT-01 in a Silvercan Race about a year and a Half ago and chewed the Stock Spur... I pinched the Shocks and Electrics off it to run my Cyclone S which left me without a Shaft Drive to drift with....
So since my E10 was a Disaster, I Stripped the electronics off it and Donated it to my TT-01 Rebuild..
So My TT-01 has
HPI EN1 20T ESC
HPI 2- channel Reciever (sticker removed)
Stock Oil filled Shocks from my Cyclone S (Seem to be rather hard not sure why)
Tamiya TZ motor
Ball Bearing kit
24T/58T gearing
It does have a Noise and it seems to be comming from the back end... but I rebuilt the Diff and its still there !
I hope to get a Vid up ASAP.
Its Alive !
I used my TT-01 in a Silvercan Race about a year and a Half ago and chewed the Stock Spur... I pinched the Shocks and Electrics off it to run my Cyclone S which left me without a Shaft Drive to drift with....
So since my E10 was a Disaster, I Stripped the electronics off it and Donated it to my TT-01 Rebuild..
So My TT-01 has
HPI EN1 20T ESC
HPI 2- channel Reciever (sticker removed)
Stock Oil filled Shocks from my Cyclone S (Seem to be rather hard not sure why)
Tamiya TZ motor
Ball Bearing kit
24T/58T gearing
It does have a Noise and it seems to be comming from the back end... but I rebuilt the Diff and its still there !
I hope to get a Vid up ASAP.
