Descent Wheels for drifting
 

who likes these wheels.(Dont worry bout da tire) http://www.dynamiterc.com/Products/D...ProdID=DYN7955

Edit: Dynamites other wheels are good looking too

RE: Descent Wheels for drifting
 

I assume no one likes them, lol

RE: Descent Wheels for drifting
 

i have those rims they r nice ;)


http://i74.photobucket.com/albums/i2...d/xxx-s013.jpg

RE: Descent Wheels for drifting
 

hey can I save that pic. Im asking for permission

RE: Descent Wheels for drifting
 

Are they well built??

Hot Works rims have been proven to look good but are too soft for sliding..

RE: Descent Wheels for drifting
 

yea they are well built. They all come preglued with treads on them. Im buyin them for the streetracing side of my tt-01[8D]

RE: Descent Wheels for drifting
 

BTW I dont feel like making a thread for this but would these shocks fit the tt-01 fine http://www2.towerhobbies.com/cgi-bin...?&I=LXAHM7&P=7

RE: Descent Wheels for drifting
 

there 58mm.. Stock Shocks for TT-01 are 50-55mm they may be a Tad Big

RE: Descent Wheels for drifting
 

oh ok would tc3 or 4 shocks fit?

RE: Descent Wheels for drifting
 

You can use those shocks, just use shock limiters. You can either use o-rings or small plastic washers and fit them on the shock shaft under the piston when you assemble the shocks.

[link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXSG46&P=7]http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXSG46&P=7[/link]
Tc3 shocks will also fit in terms of length and you can adjust accordingly because they already include shock limiters. THe only thing you'll have to worry about is finding the right mounting screws, as the tc3 shocks use a pivot ball insert mounted on a 4-40 screw whereas the tamiya uses a 3mm tapping screw.

RE: Descent Wheels for drifting
 

wow. [X(] thx your knowledge is really coming up on here