RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Drifting (https://www.rcuniverse.com/forum/rc-drifting-304/)
-   -   PVC vs ABS? (https://www.rcuniverse.com/forum/rc-drifting-304/5059844-pvc-vs-abs.html)

vi3tnameseboy 12-03-2006 04:30 PM

RE: PVC vs ABS?
 
when i use the abs pipe.. it's way tooo slippery. what should i do?

[]TEX[] 12-03-2006 04:32 PM

RE: PVC vs ABS?
 


ORIGINAL: vi3tnameseboy

when i use the abs pipe.. it's way tooo slippery. what should i do?
Use PVC

jaskel 12-03-2006 04:46 PM

RE: PVC vs ABS?
 
I thought ABS was not as slippery as PVC??? But as magnat said; ABS is slippery as hell untill it is worn in, then it drifts niocely....

DO a couple batteries wearing it in, then get into it.

Auslide 12-03-2006 04:48 PM

RE: PVC vs ABS?
 


ORIGINAL: jaskel

I thought ABS was not as slippery as PVC??? But as magnat said; ABS is slippery as hell untill it is worn in, then it drifts niocely....

DO a couple batteries wearing it in, then get into it.

Spot on

ABS still has a Slippery outer coating

When this gets worn away , your left with a Rather Grippy Plastic Surface..

You should have the Outer Coat worn away in about 20 mins depending on Pipe Used and surface Drifted on..


[]TEX[] 12-03-2006 04:49 PM

RE: PVC vs ABS?
 


ORIGINAL: jaskel

I thought ABS was not as slippery as PVC??? But as magnat said; ABS is slippery as hell untill it is worn in, then it drifts niocely....

DO a couple batteries wearing it in, then get into it.
Yes, it will be slippery when new, bu the ABS is softer so it wil begin to melt and groove up for better traction.

Auslide 12-03-2006 04:52 PM

RE: PVC vs ABS?
 
ABS is still harder then rubber so the Grip to Slip factor will be Just fine..

PVC on the other hand is Way Harder compound and there for will always feel like sliding on ICE..

jaskel 12-03-2006 04:54 PM

RE: PVC vs ABS?
 
why not give it a light sanding before use?? or am i thinking outside the box here??

[]TEX[] 12-03-2006 04:55 PM

RE: PVC vs ABS?
 


ORIGINAL: jaskel

why not give it a light sanding before use?? or am i thinking outside the box here??
What's the point, the car will do it faster than you ever could.;)

Rs43EVOman 12-03-2006 09:16 PM

RE: PVC vs ABS?
 
So, where can the get 2inch diamtere ABS pipe on the web? Iw ould like somthing around 9 inches, but a foot long pipe is fine.

[]TEX[] 12-03-2006 10:28 PM

RE: PVC vs ABS?
 


ORIGINAL: Rs43EVOman

So, where can the get 2inch diamtere ABS pipe on the web? Iw ould like somthing around 9 inches, but a foot long pipe is fine.
No idea, just look in the yellow pages and go to a plumbing supply store.

jaskel 12-04-2006 05:32 AM

RE: PVC vs ABS?
 
i got my poly pipe from an irrigation shop today...5 bucks for 1 mtr!!!

[]TEX[] 12-04-2006 08:38 AM

RE: PVC vs ABS?
 


ORIGINAL: jaskel

i got my poly pipe from an irrigation shop today...5 bucks for 1 mtr!!!
[X(]

Rs43EVOman 12-04-2006 06:05 PM

RE: PVC vs ABS?
 
I know im gona try thatm but your telling me hteres no place on the web wehere they sell ABS?

jaskel 12-04-2006 06:10 PM

RE: PVC vs ABS?
 
unless they are custom built...then no. You can order a set of rims with pre fitted Poly tyres from Magnat, he is selling sets at the moment for the XLR8RC website. They are very nice rims.

Now i have to stop thinking about drifting and get to work..lol

[]TEX[] 12-04-2006 06:21 PM

RE: PVC vs ABS?
 


ORIGINAL: Rs43EVOman

I know im gona try thatm but your telling me hteres no place on the web wehere they sell ABS?
There probably is, but it will cost you much more than going to a store to get it.

driftdriftdrift 12-04-2006 06:58 PM

RE: PVC vs ABS?
 
you want to break your ghetto shoes in, whether it be PVC or ABS. once you drive on the asphalt a few times the tires get worn and you actually have better drifts as the tire itself wears down.

either way i drift tape, i dont really care what other people say. i like sliding tape because it gives speed and control. Its not like driving on ice but not really like rubber. Electrical tape and some clear plastic tape work real well. yeah it wears out but i can get like 5-8 runs before i really have to re wrap.

Auslide 12-04-2006 11:54 PM

RE: PVC vs ABS?
 


ORIGINAL: jaskel

unless they are custom built...then no. You can order a set of rims with pre fitted Poly tyres from Magnat, he is selling sets at the moment for the XLR8RC website. They are very nice rims.

Now i have to stop thinking about drifting and get to work..lol
Too late.. Orders have been filled... No more Rims to be sold..

Besides, with Air freight.. it would cost a alot to post them from here to anywhere else in the world..


Rs43EVOman 12-05-2006 04:34 PM

RE: PVC vs ABS?
 
So basically you guys re telling me theres no website on this country where i can buy 2'' diameter ABs pipe? Ive looked on ebay, and cant find any for sale,a nd i dont think my local plumbing shops sell it, but we shall see.

jaskel 12-05-2006 04:38 PM

RE: PVC vs ABS?
 
Id say thats what they are saying...

although there is one place you may find some www.google.com.au or www.yellowpages.com

[]TEX[] 12-05-2006 04:43 PM

RE: PVC vs ABS?
 
http://www.pipestock.com/ABS-Pipe_cp-497/

Rs43EVOman 12-05-2006 04:48 PM

RE: PVC vs ABS?
 
Omg mman thats the first site I or anyone else has found, but i wondering which class of ABs do i need? It would be better if the site was in the US, but that will do. Absolutely no local plumbing supplies in my area sell Abs (i tried like 10), so if i have to resort from buying a 6m length from another continent so be it.

jaskel 12-05-2006 04:52 PM

RE: PVC vs ABS?
 
im sure you could get a couple of ya together and split it...

btoby 12-05-2006 04:52 PM

RE: PVC vs ABS?
 
ABS pipe was outlawed a few years back,in Indiana for residential plumbing. it's burning fumes are really bad to breath in compared to PVC.
Not that it matters either way, they will both kill you but you have no chance with one breath of ABS.

Rs43EVOman 12-05-2006 04:56 PM

RE: PVC vs ABS?
 
the wheels im gonna be using have a diamter of 48MM (1.9 inches) so I want 2inch pipe anyways right? I dont think the .01 inches is gonna matter, but just checking.

Also i forgot to clarify but by 2inch diamter pipe you mean the inner diamter right?

[]TEX[] 12-05-2006 05:00 PM

RE: PVC vs ABS?
 


ORIGINAL: Rs43EVOman

Also i forgot to clarify but by 2inch diamter pipe you mean the inner diamter right?
yes


All times are GMT -8. The time now is 01:09 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.