TL-01 Help
 

Hi guys, i havent used my 4wd shaft driven electric tamiya TL-01 1/10th scale for some time, and i wanted to start getting into drifting just for a mess around for awhile untill i get a better car, do i have to do any modifications to the car to make it drift or do i just have to put ABS/PV w.e tyres on it?

here is a full spec on the car just in case
http://www.abcmodelsport.net/p348236...-GT3-TL01.html

Help is much apreciated
Steven.

RE: TL-01 Help
 

Get a cheap bearing set for it as well; just as a safeguard. Otherwise nothing more is needed. If you find it hard to get into a slide, remove the rear diff and pack it out with some blue tack. Start with a little; then build it up, you don't wanna go straight in and lock it up completely like a lot of people will tell you to do.


Chris.

RE: TL-01 Help
 

ok thanks, so its only the wheels/tyers i need, but just a spair pair of bearings just incase mine pack up? its vertualy new, i havent even got the shall done ive had it bout 2 years, but the guy at the shop sold me the wrong paint so its kidna messed up, anyway of getting it off without destroying the plastic?

RE: TL-01 Help
 

You can use DOT3 brake fluid, A tut might be some place here

RE: TL-01 Help
 

yeah i coudl do with some help i dont know what to do with them apart from drive them and stick it together with the manual :P

RE: TL-01 Help
 

[link=http://www.drccentral.com/forum/viewtopic.php?t=5458]Paint Removel[/link]

RE: TL-01 Help
 

thanks for that mate!, so im getting some ABS wheels tyres all in one they are, so with them i should be all set?

RE: TL-01 Help
 

Yup, Your set Bro

RE: TL-01 Help
 

there the wheels i was talking about; http://www.tamiyaclub.com/picturefra...07221724_4.jpg

And thanks for your help guys.
im verry grateful.