I thinks it complete??!?!
 

Ok so i have been posting a ton of stuff asking questions and i think i finally have all the parts i need to join the world of drifting. This is what i have......

[link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXHWN0&P=ML]TT-01[/link]
Lexon Scissors
Polycarbonate paint
tt-01 bearings set
Aluminum drive shaft
Futaba Reciever/transmitter/2 servos
Aluminum motor mount
Motor Heatsink
Anti-Wear grease
Running a 12t esc with Speedgem 16t double :P

and i already have batteries and charger.

I was planning on figuring out how to do the pvc over the rims.
Is that everything???

RE: I thinks it complete??!?!
 

Try to find a front one-way and GET THOST PVC's!!!

RE: I thinks it complete??!?!
 

a front one-way???

RE: I thinks it complete??!?!
 

wouldn't the one way make it so your front won't go in reverse?( I know more about trucks so I could totally be off, so feely free to disregard anything I say)

Nasher

RE: I thinks it complete??!?!
 

Bingo. It allows the rear wheels to lock up (like an e-brake) while letting the front wheels continue spinning, so they have some grip. This lets them flick the tail out into the slide, and then you stomp on the power/ pulse it/whatever your technique and slide around the corner.

RE: I thinks it complete??!?!
 

I don't know about that. A fron't one way makes both wheels turn at the same speed.
The car will act like you pulled the E-Breake on a real car.

RE: I thinks it complete??!?!
 

I said that... and I've used one, and that's what I did to get the slide...

RE: I thinks it complete??!?!
 

You posted like seconds before I did so I didn't know:D

RE: I thinks it complete??!?!
 

Oh yh. Sorry matey for any offence :D

RE: I thinks it complete??!?!
 

I wouldn't b sutre if you want a Front-oneway to start with many people just don't like it,

And can't drift with it,

So first learn how to drift and then go out and try the front-onewya![8D]

RE: I thinks it complete??!?!
 

I agree with FireStriker, just lock the stock diffs

RE: I thinks it complete??!?!
 

Lock the front and the back?

RE: I thinks it complete??!?!
 

if you drift DO NOT GET A ONE WAY!!!!

RE: I thinks it complete??!?!
 

I like Infernox,

Striaght and to the Point!;)

RE: I thinks it complete??!?!
 

hummmm....

if you new never put a one way in to start, i would suggest stuffing the diffs if your building the car, i would also say and it is TOTALY up to you....

get some new shocks!, i hate the stock shocks tamiya supply, i would suggest a set of carson shocks, allu, threaded, tamiya spring set fits them and are very high spec for a very cheap affordable price..

its just an idea, you buying the following and i think in all honesty the ride of the car is important, and the ride "ride's" on the shocks!..

:D ;)