RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Drifting (https://www.rcuniverse.com/forum/rc-drifting-304/)
-   -   Possible first nitro. (https://www.rcuniverse.com/forum/rc-drifting-304/8991135-possible-first-nitro.html)

Wepo 08-04-2009 11:44 PM

Possible first nitro.
 
I have been looking at 2 cars (1 electric 1 nitro) and am starting to like the power the HPI RS4 gives. I am good with instructions and understood the manual so I have a few questions. I noticed a combo and I decided to see whats in it. I don't need it but I just wanted to see what it came with. Now first thing I noticed was the "threadlocker" and I'm not familiar with what this is used for. 2nd is it says it needs 12 AA batteries 8 for radio and 4 for battery box. Whats the battery box? Last thing is whats a recommend fuel for this car. They recommend a certain percentage of nitro and oils and don't know what to lean towards. I'm not a cheapo so recommend me something "good" and not cheap (unless they go together).
Thanks a ton in advance,
Ryan

Mufasa_719 08-05-2009 04:23 AM

RE: Possible first nitro.
 
The thread lock is for screws that have metal to metal contact. I hleps to hold them in due to a lot of vibration that a Nitro puts out. Kinda like GLUEING the screws in. The 4 batts needed for the battery box are to power the electronics as the car is run from the nitro motor. As for fuel O'donnals is good and I always ran Sidewinder and never had problems. You would want to look for 20% nitro.

Good luck on deciding what road you want to drive down[8D]

Wepo 08-05-2009 12:16 PM

RE: Possible first nitro.
 
I think I've decided with the RS4. The website I'm looking at says 10%-15% Nitro and 16% lube. Should I still go with 20%?


All times are GMT -8. The time now is 05:09 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.