TACON?
#1
Member
Thread Starter
Join Date: Sep 2010
Location: Davenport,
IA
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
TACON?
Ok I have been looking at these Tacon brushless motors the specs and side by side on road test VS. velineon it seems pretty beasty BUT the price kinda scares me why so cheap for something that seems to perform great? should I stay away from them or buy 15 ? IDK any on hands info on these would be great! Thanks guys!
#3
Member
Thread Starter
Join Date: Sep 2010
Location: Davenport,
IA
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
RE: TACON?
Also I plan on getting one for my slash 4x4 and one for my 1/16 summit so how big of a motor can both of them handle without MAJOR changes or upgrades?
#8
Senior Member
Join Date: May 2010
Location: Cheyenne,
WY
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
RE: TACON?
i run tacons in almsot all of my electric vehicles. way more power than needed. i don't see why you shouldn't get them.
you get what you pay for is almost an obsolete saying.
i use the hobbywing 60A speedo and then the tacon motor that i see fi to my aplication.
you get what you pay for is almost an obsolete saying.
i use the hobbywing 60A speedo and then the tacon motor that i see fi to my aplication.
#9
Member
Thread Starter
Join Date: Sep 2010
Location: Davenport,
IA
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
RE: TACON?
Well I think im gonna get slash roller for 150$ off ebay and drop a tacon in it with my spair sidwinder ESC and see how it works could turn out to be a nice 250$ (after some parts) slash 4x4
#10
Senior Member
Join Date: Apr 2004
Location: Temple City,
CA
Posts: 678
Likes: 0
Received 0 Likes
on
0 Posts
RE: TACON?
I have had nothing but good results with the Tacon motor. Only point I can make is the wire leads out of the motor are pretty stiff, and I think one needs to plan wire routing and bend them once. Otherwise they are a quality bargain.
Dennis
Dennis
#12
Senior Member
Join Date: Jun 2009
Location: Houston,
TX
Posts: 1,263
Likes: 0
Received 0 Likes
on
0 Posts
RE: TACON?
My only issue as well. They are also quite short.......
ORIGINAL: BigGrump
I have had nothing but good results with the Tacon motor. Only point I can make is the wire leads out of the motor are pretty stiff, and I think one needs to plan wire routing and bend them once. Otherwise they are a quality bargain.
Dennis
I have had nothing but good results with the Tacon motor. Only point I can make is the wire leads out of the motor are pretty stiff, and I think one needs to plan wire routing and bend them once. Otherwise they are a quality bargain.
Dennis
#13
Junior Member
Join Date: Apr 2011
Location: City of IndustryCA
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
RE: TACON?
Hello everybody! We have some new arrivals of Tacon motors! check them out
<col width="342" style="width: 257pt;" />
[youtube]http://www.youtube.com/watch?v=7qi_ObSYvX4[/youtube]
2030-3500KV-26T |
2030-3900KV-24T |
2030-3100KV-29T |
2030-4300KV-21T |
2030-6200KV-15T |
2030-5200KV-18T |
2030-3000KV-30T |
2030-4900KV-19T |
2040-2080KV-27T |
2040-4850KV-12T |
2040-4200KV-14T |
2040-3800KV-15T |
2040-3400KV-17T |
2040-3600KV-16T |
2040-2900KV-20T |
2040-2400KV-24T |
2040-1800KV-30T |
2445-2900KV-17T |
2838-2200KV-30T |
2838-3900KV-17T |
2838-2700KV-22T |
2848-2100KV-18T |
2848-2700KV-15T |
2848-4900KV-8T |
2848-2400KV-16T |
2848-2600KV-15T |
2848-2100KV-18T |
2848-970KV-34T |
2848-1800KV-22T |
2848-2400KV-16T |
2848-2300KV-17T |
2858-2600KV-11T |
2858-3200KV-9T |
2858-2000KV-14T |
2858-1600KV-18T |
2858-4800KV-6T |
2858-1900KV-15T |
2858-1700KV-17T |
3650-1350KV-28T |
3650-2200KV-16T |
3650-1100-32T |
3650-1500KV-25T |
3650-5000KV-7T |
3650-8-5T-Sensored |
3650-10-5T-Sensored |
3650-6-5T-Sensored |
3660-1025KV-23T |
3660-810KV-26T |
3660-2600KV-9T |
3660-1800KV-14T |
3660-1200KV-20T |
3660-4000KV-6T |
3660-3500KV-7T |
3660-2200KV-11T |
3660-3000KV-8T |
3674-2800KV-6T |
3674-1900KV-9T |
3674-1100KV-15T |
4465-2400KV-8T |
4465-1800KV-11T |
4465-1400KV-13T |
4475-1600KV-9T |
4475-700KV-21T |
4475-1200KV-12T |
4475-1000KV-15T |
[youtube]http://www.youtube.com/watch?v=7qi_ObSYvX4[/youtube]
#15
Senior Member
Join Date: Dec 2006
Location: milbrae,
SK, BANGLADESH
Posts: 3,538
Likes: 0
Received 0 Likes
on
0 Posts
RE: TACON?
ORIGINAL: Crapxxas19
With the cheaper castles, the price of a castle sidewinder combo is worth the extra $20 over the ezrun 60a and tacon.
With the cheaper castles, the price of a castle sidewinder combo is worth the extra $20 over the ezrun 60a and tacon.
#17
RE: TACON?
ORIGINAL: sloppyG
plus castle will answer their phone and return emails if you have an issue, good luck trying to get a hold of hobbypartz, their service is horrible
ORIGINAL: Crapxxas19
With the cheaper castles, the price of a castle sidewinder combo is worth the extra $20 over the ezrun 60a and tacon.
With the cheaper castles, the price of a castle sidewinder combo is worth the extra $20 over the ezrun 60a and tacon.
that's like calling tower if your CC ESC blows out 1-2 months down the line, and expecting tower to fix it for you...
#18
Senior Member
Join Date: Dec 2006
Location: milbrae,
SK, BANGLADESH
Posts: 3,538
Likes: 0
Received 0 Likes
on
0 Posts
RE: TACON?
yeah, I'll just call china
hobbypartz mailed me items after I'd canceled the order, 3 days after the order was canceled
they confirmed that the order was canceled, then they shipped the stuff anyways
I spent a week trying to get someone on the phone, nobody would ever pick up (and they're in california, not in some far off land)
the fastest they ever responded to an email was 3 days, and each email they replied to, they kept stalling and trying to prevent me from returning the items
they made me pay the shipping fees to send back an order that was canceled, I loved paying shipping costs to fix their screwup
just a heads up to anyone considering doing business with those shady people at hobbypartz.. if they weren't so shady, they wouldn't have 4 corporate websites all with different appearing storefronts. they hope that they'll screw you over at one, and you'll go shop at one of their other sites
they finally took it down, but they had a poll on their own customer service forum where over 50% of the responses said they'd never shop there again
hobbypartz mailed me items after I'd canceled the order, 3 days after the order was canceled
they confirmed that the order was canceled, then they shipped the stuff anyways
I spent a week trying to get someone on the phone, nobody would ever pick up (and they're in california, not in some far off land)
the fastest they ever responded to an email was 3 days, and each email they replied to, they kept stalling and trying to prevent me from returning the items
they made me pay the shipping fees to send back an order that was canceled, I loved paying shipping costs to fix their screwup
just a heads up to anyone considering doing business with those shady people at hobbypartz.. if they weren't so shady, they wouldn't have 4 corporate websites all with different appearing storefronts. they hope that they'll screw you over at one, and you'll go shop at one of their other sites
they finally took it down, but they had a poll on their own customer service forum where over 50% of the responses said they'd never shop there again
#20
Senior Member
Join Date: Oct 2006
Location: eastern,
IL
Posts: 3,951
Likes: 0
Received 0 Likes
on
0 Posts
RE: TACON?
ORIGINAL: sloppyG
yeah, I'll just call china
hobbypartz mailed me items after I'd canceled the order, 3 days after the order was canceled
they confirmed that the order was canceled, then they shipped the stuff anyways
I spent a week trying to get someone on the phone, nobody would ever pick up (and they're in california, not in some far off land)
the fastest they ever responded to an email was 3 days, and each email they replied to, they kept stalling and trying to prevent me from returning the items
they made me pay the shipping fees to send back an order that was canceled, I loved paying shipping costs to fix their screwup
just a heads up to anyone considering doing business with those shady people at hobbypartz.. if they weren't so shady, they wouldn't have 4 corporate websites all with different appearing storefronts. they hope that they'll screw you over at one, and you'll go shop at one of their other sites
they finally took it down, but they had a poll on their own customer service forum where over 50% of the responses said they'd never shop there again
yeah, I'll just call china
hobbypartz mailed me items after I'd canceled the order, 3 days after the order was canceled
they confirmed that the order was canceled, then they shipped the stuff anyways
I spent a week trying to get someone on the phone, nobody would ever pick up (and they're in california, not in some far off land)
the fastest they ever responded to an email was 3 days, and each email they replied to, they kept stalling and trying to prevent me from returning the items
they made me pay the shipping fees to send back an order that was canceled, I loved paying shipping costs to fix their screwup
just a heads up to anyone considering doing business with those shady people at hobbypartz.. if they weren't so shady, they wouldn't have 4 corporate websites all with different appearing storefronts. they hope that they'll screw you over at one, and you'll go shop at one of their other sites
they finally took it down, but they had a poll on their own customer service forum where over 50% of the responses said they'd never shop there again
#21
Senior Member
Join Date: Jul 2009
Location: Watertown,
SD
Posts: 618
Likes: 0
Received 0 Likes
on
0 Posts
RE: TACON?
ORIGINAL: guys2nv
Hmmm, I've ordered a bunch from hobbypartz and have not had a single issue with them-Guess I'm just lucky.
Hmmm, I've ordered a bunch from hobbypartz and have not had a single issue with them-Guess I'm just lucky.
#23
Senior Member
Join Date: Jul 2009
Location: appomattox,
VA
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
RE: TACON?
when ever i shop from hobbypartz its shipped from the usa not china i live in virginia its takes 4-5 days to get my items i have never had a problem with returns or exchanges you must be confused with hobbyking all i run is tacon motors i have run my 2950kv in my slash on 4s no problems and thats bashing not speed runs for 30min motor temp was 135 to each its own but i cant see paying 100 for a motor unless im a serious racer which im not just to bash and have fun tacon all the way i have use the 2950kv for over a year its still as strong today as the day i got it
#24
RE: TACON?
ORIGINAL: momogt
when ever i shop from hobbypartz its shipped from the usa not china i live in virginia its takes 4-5 days to get my items i have never had a problem with returns or exchanges you must be confused with hobbyking all i run is tacon motors i have run my 2950kv in my slash on 4s no problems and thats bashing not speed runs for 30min motor temp was 135 to each its own but i cant see paying 100 for a motor unless im a serious racer which im not just to bash and have fun tacon all the way i have use the 2950kv for over a year its still as strong today as the day i got it
when ever i shop from hobbypartz its shipped from the usa not china i live in virginia its takes 4-5 days to get my items i have never had a problem with returns or exchanges you must be confused with hobbyking all i run is tacon motors i have run my 2950kv in my slash on 4s no problems and thats bashing not speed runs for 30min motor temp was 135 to each its own but i cant see paying 100 for a motor unless im a serious racer which im not just to bash and have fun tacon all the way i have use the 2950kv for over a year its still as strong today as the day i got it
HW is a chinese company
#25
Senior Member
Join Date: Oct 2006
Location: eastern,
IL
Posts: 3,951
Likes: 0
Received 0 Likes
on
0 Posts
RE: TACON?
ORIGINAL: momogt
... i cant see paying 100 for a motor unless im a serious racer which im not just to bash...
... i cant see paying 100 for a motor unless im a serious racer which im not just to bash...