Official Rustler Thread
My Feedback: (2)
Join Date: Nov 2004
Location: Mississauga, ON, CANADA
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Rustler Thread
when you turn it down only do it a 1/8 at a time. so tight it all the way then turn it 1/8 and then test it and then another 1/8 until you notice no change
My Feedback: (1)
Join Date: Oct 2004
Location: Salem,
WV
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Rustler Thread
Hi
Does anybody have this body mount plate or is using one ?
http://www3.towerhobbies.com/cgi-bin...&I=LXJK73&P=ML
I need to find out what the size of the thread or the diamter of the posts
Thanks Scott
Does anybody have this body mount plate or is using one ?
http://www3.towerhobbies.com/cgi-bin...&I=LXJK73&P=ML
I need to find out what the size of the thread or the diamter of the posts
Thanks Scott
Senior Member
Join Date: Jul 2009
Location: appomattox,
VA
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Rustler Thread
i use it i lost the stock hold down and got that one
ORIGINAL: baddley
Hi
Does anybody have this body mount plate or is using one ?
http://www3.towerhobbies.com/cgi-bin...&I=LXJK73&P=ML
I need to find out what the size of the thread or the diamter of the posts
Thanks Scott
Hi
Does anybody have this body mount plate or is using one ?
http://www3.towerhobbies.com/cgi-bin...&I=LXJK73&P=ML
I need to find out what the size of the thread or the diamter of the posts
Thanks Scott
My Feedback: (2)
Join Date: Jul 2004
Location: muncie, IN
Posts: 897
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Rustler Thread
what (other then the rusty body) will work?
my gen 1 rusty is getting turned into a new style, and need a body for it.
does anyone have a used (in decent condition) body i could get??
my gen 1 rusty is getting turned into a new style, and need a body for it.
does anyone have a used (in decent condition) body i could get??
Senior Member
Join Date: Jul 2009
Location: appomattox,
VA
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Rustler Thread
i need help with motor choice for my rustler its set-up for onroad lowerd with anaconda tires and 3s lipo with xerun 80amp esc. here,s what im looking at. gforce 4pole 2800kv,tacon 3700kv 2pole sensored,tacon 3660 2200kv 2pole,tacon 4000kv 4pole sensored.
Senior Member
Join Date: Feb 2013
Location: Brisbane, AUSTRALIA
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Rustler Thread
New to the electric side of the hobby and just wondering what are the acceptable temp ranges for the vxl-3s in the rustler and the temp ranges for the velinion 3500 ? Sorry if its been mentioned before but this is a rather long thread to catch up on.
Senior Member
Join Date: Jan 2012
Location: Dothan,
AL
Posts: 877
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Rustler Thread
Well Ive decided that my next rc is gonna be a rustler vxl. Im gonna be reading over this so im bumping it to the first page so I dont have to look back so far. Cant believe this was on page 6, I thought the rustler was a pop. rc...
My Feedback: (2)
Join Date: Nov 2004
Location: Mississauga, ON, CANADA
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official Rustler Thread
the reason its far back is that it hasn't got a lot of use in a while.
fuelcoupe I cant remember off the top of my head but it should say on the traxxas website
fuelcoupe I cant remember off the top of my head but it should say on the traxxas website
Junior Member
Join Date: Jan 2007
Location: Pensacola,
FL
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Junior Member
Join Date: Jan 2007
Location: Pensacola,
FL
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
http://forum.modifiedpowerwheels.com...p?f=38&t=10701
(Read below about this one above)
http://www.edecals.com/Merchant2/mer...ct_Code=CNF154
Took me less than 60 seconds......google
This one might be perfect fit? 2.5 x 6 inches?
The other thing you could do is.....print a pic you like on paper....apply it using silicone. I onow it works for power wheels bodies. Don't ask me how...but it does work...I tried it once on my daughters jeep!
The link is the first one posted above.....have fun!
(Read below about this one above)
http://www.edecals.com/Merchant2/mer...ct_Code=CNF154
Took me less than 60 seconds......google
This one might be perfect fit? 2.5 x 6 inches?
The other thing you could do is.....print a pic you like on paper....apply it using silicone. I onow it works for power wheels bodies. Don't ask me how...but it does work...I tried it once on my daughters jeep!
The link is the first one posted above.....have fun!