Indoor Rc Supercross, Alabama
#1
Junior Member
Thread Starter
Join Date: Apr 2006
Location: springville,
AL
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Indoor Rc Supercross, Alabama
Hey just getting started on an indoor dirt rc track, last few weeks we wired up lights and built a platform, and some work benches. well we are still bringing in clay and dirt. well the track is in Springville, Al. heres some pics, hope yall like, hoping to hold practice soon, and maybe some races.
Track info: 7 to 6 ft. wide lanes, big jumps, rythym section. still building huge berms. 60x30 track, can run nitro cars, and lights are in the building and we can water the track, and eletricity is available. 1/10th scale is what we have been running.
Track info: 7 to 6 ft. wide lanes, big jumps, rythym section. still building huge berms. 60x30 track, can run nitro cars, and lights are in the building and we can water the track, and eletricity is available. 1/10th scale is what we have been running.
#2
Junior Member
Thread Starter
Join Date: Apr 2006
Location: springville,
AL
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
RE: Indoor Rc Supercross, Alabama
the jump in front of the guy is a 12ft long triple jump, and the 6 doubles are right beside it... we knocked the jumps down beside the walls b/c we were jumpin into the walls. but we are gonna add in small ones.
#6
Junior Member
Thread Starter
Join Date: Apr 2006
Location: springville,
AL
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
RE: Indoor Rc Supercross, Alabama
yea not too bad, just the shed was soo full of junk we had to clean it all out, but we are off to haul in alot more dirt. Later guys
#7
Junior Member
Thread Starter
Join Date: Apr 2006
Location: springville,
AL
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
RE: Indoor Rc Supercross, Alabama
well today we hauled in alot of dirt, made all the jumps a little bigger, and used a packer, we made sum bigger berms, and some new jumps. well have new pics up tomorrow