j.m.

A little imagination wanted here!

I have no idea what i want for x-mas, other than a dc peak charger and 4st tires and wheels.

What else should i ask for?

*please, no new car suggestions, or b-less, or lipo.*

I'm also thinking a 15 turn motor, but the stock motor is already fast enough for my track.

By the way, this stuff is for my Academy SB Pro.

RC_Basher20

My Feedback: (4)

umm i allready made a thread about this but... maybe its on the 2nd page and no one resonded to to oh well probably new springs? steel transmission? i have no idea lol all im asking for x-mas is a mm 6900 (ill pay half) and a 7 cell battery

j.m.

this car doesn't have a tranny, and i want to stick with brushed.

kavvika

Orion SV2 Pro BB 15T: one of the best 15T sport motors. Maybe a quality battery pack that you can tear down and rebuild SxS. Spektrum DX2.0 radio system? What about a 625MG servo? Is your SB stock, or what hop-ups do you have on it, and what electronics do you have?

j.m.

not getting any new electronics, already have an Airtronics MX3-S and a 3 channel super micro synthesized receiver. Novak XRS speedo, and a b-less Airtronics servo that does 70oz-in. of torque, and .12 transit time. Plenty good for a 4wd buggy. It is the Pro version, so it has a CF chassis, lots of aluminum, Titanium turnbuckles, etc...

It also has upgraded b4 shocks on it.

rekzster

box of pinions and spurs so you have a complete set.

j.m.

i already have spur gears out my ears, and it is geared perfectly already. I am using a 22 tooth pinion with a stock motor.

Any recommendations on a pinion for a 15 turn?? I'm thinking like a 17.

kavvika

Wow, sounds like you're pretty set. I see alot of very nice components. The XRS is the only thing I could see being upgraded, as I recall it has a 40amp limit. Might consider picking up a used LRP 7.1 and running a lower turn brushed motor?

j.m.

not too low, as the track i run at is the perfect size for a stock motor. I think the limit is more than that, as it heats up less than the motor, and the motor is the one that gets cooling airflow from the hole in the body. The esc is covered in wires.

Oh, forgot. I have two GP3300 packs.

RC_Basher20

My Feedback: (4)

ur truck is perfect, now its time to buy a new one lol maybe get new stuff like a card for a laptop if u have 1, food, etc. lol

j.m.

I'm on my mom's laptop right now, which totally sucks *****. My pc is a Top-of-the-line custom. But i don't know what happened to the i-net. Whenever i scroll down the page the whole page fills down from the top to the bottom, just like a power point presentation. So i don't use it much for surfing th web. I'm using Mozilla. If anybody knows what's wrong, please tell me.

kavvika

What about a new body, an airbrush and some paint? Have you ever painted bodies before?

j.m.

Oh, and it's a 4wd buggy not a truck.

jatoracing33

how bout an air compresser to help with cleaning?

j.m.

got one of those, an airbrush, and i can paint real fire. I am going to do a new body for this car sometime soon.

RC_Basher20

My Feedback: (4)

now i want to paint my own truck! lol expensive for paint though lol and the airbrushes

j.m.

i have $12 airbrush, and this isn't expensive.

http://www3.towerhobbies.com/cgi-bin...?&I=LXRV27&P=7

Always Dreamin

it's not that expensive. unless you want to get the nice stuff. i don't like making nice bodies. it's pointless if you're a basher in my opinion.. i always am on my lid

novakmaxx

I am getting a RC!8MT with a mamba 8400kv set up and 3s 2400 mah lipo.

bigairlife

Definetly not a r18mt. Get a Xray M18t and a mamba 25 esc and a mamba 6800kv brushless motor and get a new radio. Then you will be good to go.