AE SC10 4x4 Build
So it begins...
First box arrived with lots of goodies... More coming and more to order.. http://upload.pbase.com/cyberbug/ima...4/original.jpg |
RE: AE SC10 4x4 Build
What was the budget on this build?
|
RE: AE SC10 4x4 Build
ORIGINAL: redfisher1974 What was the budget on this build? Funny question :) I stopped counting.. keeps me less depressed I'll post more pictures as more stuff shows up |
RE: AE SC10 4x4 Build
Probably best that way ;)
|
RE: AE SC10 4x4 Build
ORIGINAL: redfisher1974 What was the budget on this build? especially considering the actual RC won't be here for at least a few more weeks maybe in the meantime, can you give us a comparison of the great planes CA glue vs the AKA CA glue? |
RE: AE SC10 4x4 Build
ORIGINAL: redfisher1974 What was the budget on this build? |
RE: AE SC10 4x4 Build
Just a poor white boy trying to earn a living...[&:]
|
RE: AE SC10 4x4 Build
@ Poor White Boy
Not to worry... things will get better when you grow up... keep working hard ;) |
RE: AE SC10 4x4 Build
You mean when my kids grow up.....;)
|
RE: AE SC10 4x4 Build
lol... you are really think they are going to move out :)
|
RE: AE SC10 4x4 Build
I saw a picture on another forum, we may be seeing this build start sooner rather than later
a whole bunch of kits on pallets, ready to ship..... |
RE: AE SC10 4x4 Build
Today's Package - RX8 / SC4X - 4.5T
http://upload.pbase.com/cyberbug/ima...5/original.jpg I also went to LHS today and ordered a Spektrum DX3R Pro + hard case and the SC10 4x4 kit from LHS, I cancelled the tower hobbies order. I would have saved a little but wanted to support the LHS. Also ordered Hyperion EOS 0720i Super DUO3 charger and Muchmore 24A Power Master World Edition 2 The only thing left to order is battery which I am waiting to be available - Reedy hardcase, 2S 5600mhA 60C - Should I order two? |
RE: AE SC10 4x4 Build
ORIGINAL: sloppyG I saw a picture on another forum, we may be seeing this build start sooner rather than later a whole bunch of kits on pallets, ready to ship..... That would be great, my LHS said they'll get it quick as soon as it is released. which is fine even if I have to wait a week more. at least I am supporting them they have a 4 driver race team and they are very helpful with information. How should I plan on painting the body, I also thinking of getting a Proline second body as well. |
RE: AE SC10 4x4 Build
ORIGINAL: Cyberbug ORIGINAL: sloppyG I saw a picture on another forum, we may be seeing this build start sooner rather than later a whole bunch of kits on pallets, ready to ship..... That would be great, my LHS said they'll get it quick as soon as it is released. which is fine even if I have to wait a week more. at least I am supporting them they have a 4 driver race team and they are very helpful with information. How should I plan on painting the body, I also thinking of getting a Proline second body as well. If you need any help, questions, or concerns when you get the sc10 on building tips or guides, just post up....... |
RE: AE SC10 4x4 Build
Thank you and will do that is why I started the thread, I'll picture document every step.
I need advice on tools, what the most common size Hex drivers and nut drivers do I need? And should I get one or 2 batteries? |
RE: AE SC10 4x4 Build
More batteries the better[&:]
|
RE: AE SC10 4x4 Build
ORIGINAL: Cyberbug Thank you and will do that is why I started the thread, I'll picture document every step. I need advice on tools, what the most common size Hex drivers and nut drivers do I need? And should I get one or 2 batteries? And yes as TBJ stated, the more batteries the better....... |
RE: AE SC10 4x4 Build
got a garage full of tools so I am covered on the nut driver, have all kinds of hex keys/ T-keys as well. but I like tools so I ordered some hex drivers.
Also ordered a stand which has shock stands built in it (I think) been researching power supplies, power in my house is 15Amp fuses, I have a 24amp/12~16v out powersupply coming, the charge seems to be a beast, it will work from 12-24vlts, higher is recommended. I hope they both work, I hate returning things :( I am will run it at 16vs |
RE: AE SC10 4x4 Build
ORIGINAL: Cyberbug got a garage full of tools so I am covered on the nut driver, have all kinds of hex keys/ T-keys as well. but I like tools so I ordered some hex drivers. Also ordered a stand which has shock stands built in it (I think) been researching power supplies, power in my house is 15Amp fuses, I have a 24amp/12~16v out powersupply coming, the charge seems to be a beast, it will work from 12-24vlts, higher is recommended. I hope they both work, I hate returning things :( I am will run it at 16vs Yeah but don't you want the AE tools to go with the sct ? lol jk, yeah i figured you had all the tools, but just thought i'd do a sales pitch for AE ;-) Can't wait to see your setup once its all done....... |
RE: AE SC10 4x4 Build
ORIGINAL: Cyberbug got a garage full of tools so I am covered on the nut driver, have all kinds of hex keys/ T-keys as well. but I like tools so I ordered some hex drivers. Also ordered a stand which has shock stands built in it (I think) been researching power supplies, power in my house is 15Amp fuses, I have a 24amp/12~16v out powersupply coming, the charge seems to be a beast, it will work from 12-24vlts, higher is recommended. I hope they both work, I hate returning things :( I am will run it at 16vs The SC10 4x4 is going to be all metric. ThunderbirdJunkie's got a little Blue Point 1/4" drive nutrunner (y'know, the thing wtih the screwdriver type handle) with a set of small 1/4" drive sockets he keeps in his RC toolbox. Only when serious bouts of frustrations come (which normally doesn't come) he busts out the Matco prybar set when wrenching on RC's[&:] Last time they were used, though, was on a possum found under the hood of a fullsize Dodge van[&:] |
RE: AE SC10 4x4 Build
Before ThunderbirdJunkie recommendation I had already ordered the following:
O.S. Speed Hex Wrench Driver 2.5mm O.S. Speed Hex Wrench Ball Driver 2.5mm O.S. Speed Hex Wrench Driver 2.0mm O.S. Speed Hex Wrench Driver 1.5mm O'Donnell Hex Driver 3/32" O.S. Speed Hex Wrench Driver 3.0mm O'Donnell Hex Driver .050" O'Donnell Hex Driver 1/16" Cyberbug (;)) has full set of 1/4" sockets metric and sae so good there. got a second solder gun too (60watt), the other is 40watt. ordered some extra wheels and tires for different terrain.. Pictures to come. |
RE: AE SC10 4x4 Build
on the kit delivery front news is not good...
Amain initially had a in stock date of April 30th, then May 9th and now May 16th.. Not liking Associated at all :( |
RE: AE SC10 4x4 Build
ORIGINAL: Cyberbug on the kit delivery front news is not good... Amain initially had a in stock date of April 30th, then May 9th and now May 16th.. Not liking Associated at all :( |
RE: AE SC10 4x4 Build
NVM on tower they just put it back to early May, ***......
|
RE: AE SC10 4x4 Build
Well I am relying on my LHS now, put down a deposit yesterday.
|
RE: AE SC10 4x4 Build
Customs is holding up the SC10 4x4.
If they'd just manufacture in the US like they USED to they wouldn't have this problem, or the month long boat ride :eek: |
RE: AE SC10 4x4 Build
Not to mention the hold ups out of Japan, I have 8 days off this month as we can't get parts out of Japan....
|
RE: AE SC10 4x4 Build
AE doesn't have anything to do with Japan, they manufacture in China now.
|
RE: AE SC10 4x4 Build
Well everything I could possibly need and more has been ordered. Its been a very very expensive two weeks.
I called LHS today to grab a kit as they have been release or will be soon. All kinds of updates on the web... I should have a picture of more stuff tonight :) |
RE: AE SC10 4x4 Build
Im more interested than anything in seeing how it does with the belt drive on a 4X4 CORR truck, its great for on road but they may or may not have problems with it on this one...
|
RE: AE SC10 4x4 Build
Looking at about 2 weeks till the SC10 4x4 hits shelves.
|
RE: AE SC10 4x4 Build
ORIGINAL: ThunderbirdJunkie AE doesn't have anything to do with Japan, they manufacture in China now. |
RE: AE SC10 4x4 Build
ORIGINAL: redfisher1974 ORIGINAL: ThunderbirdJunkie AE doesn't have anything to do with Japan, they manufacture in China now. |
RE: AE SC10 4x4 Build
Yeah and Toyota sells cars made in Canada, But allot of the components come from Japan...
|
RE: AE SC10 4x4 Build
ORIGINAL: redfisher1974 Yeah and Toyota sells cars made in Canada, But allot of the components come from Japan... you do know this is just a kit right? with no electronics |
RE: AE SC10 4x4 Build
Never know where a spring or any small part that they don't manufacture in house could come from.
|
RE: AE SC10 4x4 Build
Since he thread is taking a different turn.. Let me post pictures of the package today..
JConcepts wheels, I tried ordering another set today and they are already out.. http://www.pbase.com/cyberbug/image/134404260.jpg |
RE: AE SC10 4x4 Build
It's like xmas everyday at your house...:)
|
RE: AE SC10 4x4 Build
I think I get a high every time there is a package :)
Waiting on a few more ;) |
RE: AE SC10 4x4 Build
ORIGINAL: Cyberbug I think I get a high every time there is a package :) Waiting on a few more ;) And the 4x4 will be out the end of this week, my LHS said they'll be getting theres by thursday/friday (but all already spoken for damit)..... And there are alot of people on diff. forums saying the same as well...... I am going to call tower tomorrow to see if I made the list for the first shipment or not....... |
All times are GMT -8. The time now is 04:21 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.