Need help selecting 1:10 scale chassis.
10-28-2019, 03:50 PM
#1
Thread Starter
Join Date: Jul 2015
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Need help selecting 1:10 scale chassis.
I want to build a specific RC car. The only body I could find was from Delta Plastics. It’s a 1/10 scale 1965 Shelby Daytona coupe. The wheel base is 260 mm. Is this a common size? Can anyone recommend a rolling chassis w a 260mm wheelbase.
I don’t race, I just like the 65 Daytona coupe so less expensive is better.
thank you
Thomas Davis
I don’t race, I just like the 65 Daytona coupe so less expensive is better.
thank you
Thomas Davis
10-28-2019, 07:24 PM
#2
Are you talking about this body here:
https://deltaplastikusa.com/products...0783c381&_ss=r
They clearly state that it fits any 1/8 buggy:
one of the least expensive cars that I can find available right now which is compatible would be this:
https://www.redcatracing.com/Blackou...category=18367
Only problem is that it comes with SCT wheels and you might want to get a GT8 just so that it looks more scale... if it were me I'd get this:
https://www.nitrorcx.com/52c76-maddr...ss-limite.html
https://deltaplastikusa.com/products...0783c381&_ss=r
They clearly state that it fits any 1/8 buggy:
one of the least expensive cars that I can find available right now which is compatible would be this:
https://www.redcatracing.com/Blackou...category=18367
Only problem is that it comes with SCT wheels and you might want to get a GT8 just so that it looks more scale... if it were me I'd get this:
https://www.nitrorcx.com/52c76-maddr...ss-limite.html
10-29-2019, 12:28 AM
#3
Thread Starter
Join Date: Jul 2015
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
I should have included a link. Here is the body I purchased.
Are you talking about this body here:
https://deltaplastikusa.com/products...0783c381&_ss=r
They clearly state that it fits any 1/8 buggy:
one of the least expensive cars that I can find available right now which is compatible would be this:
https://www.redcatracing.com/Blackou...category=18367
Only problem is that it comes with SCT wheels and you might want to get a GT8 just so that it looks more scale... if it were me I'd get this:
https://www.nitrorcx.com/52c76-maddr...ss-limite.html
https://deltaplastikusa.com/products...0783c381&_ss=r
They clearly state that it fits any 1/8 buggy:
one of the least expensive cars that I can find available right now which is compatible would be this:
https://www.redcatracing.com/Blackou...category=18367
Only problem is that it comes with SCT wheels and you might want to get a GT8 just so that it looks more scale... if it were me I'd get this:
https://www.nitrorcx.com/52c76-maddr...ss-limite.html
https://deltaplastikusa.com/products/b3-shelby-cobra-gt
10-29-2019, 12:39 AM
#4
Thread Starter
Join Date: Jul 2015
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
This is the item description.
I want to build a specific RC car. The only body I could find was from Delta Plastics. It’s a 1/10 scale 1965 Shelby Daytona coupe. The wheel base is 260 mm. Is this a common size? Can anyone recommend a rolling chassis w a 260mm wheelbase.
I don’t race, I just like the 65 Daytona coupe so less expensive is better.
thank you
Thomas Davis
I don’t race, I just like the 65 Daytona coupe so less expensive is better.
thank you
Thomas Davis
if anyone could recommend an RC car chassis that will fit I’d be grateful.
Regards
Thomas Davis
