xxSLiMxx

Its not. Just plug it in and set it up.

Jem93

hahahaha!!!!!!! YOU GOT OWNED SpeedstaBrad!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!

SpeedstaBrad

Well, i do have the crappy tamiya standard radio which can't set up so i will purchase a new one anyway.

boosteda4tq

I just finished programming mine with the stock control...I did the the 9ezrun and 2s lipo battery and now i am hooked i want more.

Can anyone recommend a good wheel and tire combo forasphaltnot black top.

xxSLiMxx

Talk to your LHS and get some foam tires!!Iv just started to use some of these for race/bashing and you can get ones that hook up really well!Or any of the HPI drift tires for drifting.

Ttam Says Blarg

Since no one else answered in my other thread can this body fit on a tt01?

http://www.prolineracing.com/p-678-t...n-chassis.aspx

xxSLiMxx

Yes, but you will need at least a 3 or 6mm offset wheel.

Allan Aguilar

Sorex belted 24mm tire and any 24mm wheel. This tire is suitedforsmooth asphalt track.

Bob076

Guys, I have installed 3racing diffs in my TT01d. What is the best option of shafts that i can use without any mods. Also i need to get an alloy steering setup, I was going for the GPM but I see RCMart are out of stock and this is where I have been buying the bulk of my TT01 gear but it neds to come complete with bearings.

Any advise is much appreciated

Cheers

cydog510

just got a TT a month ago, always wanted a fast RC car, but gas seemed to be the only option for speed when i was young, 30 now, gas was not attainable, but now electric is FAST! going to drop in an HPI saturn 20t and was wondering the gear ratios that would work with it, i am looking for good bash around speed. p.s i have read through 122 pages. thanks.

dxb90

TT01 .. VXL brushles esc and motor. 3s 5000mah max amps. running gears 25/55

tt01

body

lam1na

where did you get that body from ? looks good.

Also what speeds you getting otu of it ?

Thanks

SIRCC

Yo, slim wat up want to see mt TT-01

xxSLiMxx

Yeah dude post some pictures. I have yet to get my new body for mine....hopefuly soon.

dxb90

lam1na got 92km out of it using a gps watch strapped inside 

SIRCC

Here's one

xxSLiMxx

Niiice one!

AusDrifter18

nicely done. i have an associated TC5 and a TT01 just got an LRP 8.5T vector X12 motor and an LRP SPHERE TC ESC for my TC5 reckon my tt01 would handle it if i starpped it in there?

cydog510

so i accidently  plugged in my battery directly to my ESC output (to the motor) rather than the input. did i ruin my ESC and/or motor?
thanks so much in advance.

i have a tamiya TT-01:
superstock RZ 23T
associated A.I. quantum runner reverse ESC
intellect 4600 battery pack
deans plugs all around, the LED is still illuminated.
p.s. sorry for the multiple posts, my apologies.
cy.

pritch

Hi guys,

I just bought a TT-01 that's nearly new build. Seem to have one driveshaft that's a bit wobbly. The other three are pretty solid but this one is up front so might make the steering a bit sloppy. Anything common issues here?

Is the alu propshaft worth getting? What sort of a difference does it make?

Thx

cydog510

get it! after the bearing set, the aluminium drive shaft is one of the top upgrades, plus it looks spiffy! read as much of this forum as possible, it has so much knowledge in it

FlatVibe01

Hey guys I just bought a tt-01. I guess my question for you all is whatshould i upgrade on this first. im new to the drifting. But I like tohave nice things so just give me a list of things thanks. plus i learnfast

xxSLiMxx

Read thru the last 20-30 pages it should only take you about 30mins to do so. It will tell you eveything that you should upgrade too and where to start with the upgrades. Good luck, lets see some pictures of your ride.

FlatVibe01

Im letting one of my friends use my camera but i just bought it off ebay this is the address if it works http://cgi.ebay.com/ws/eBayISAPI.dll...m=230347286578
kinda tells you what it has if i need to change anything let me know. I think i payed to much but o well thanks to anyone that helps me
slim thanks for the reply i see you comment alot and help alot

dfiantii

Not necessarily, you did get a receiver with it which you may want to change eventually. You will definitely want to upgrade to ball bearings all around and get ride of the plastic motor mount for the metal one and upgrade to the aluminum drive shaft option. Anything else beyond that will be dependent on if you want to race or drift.