Will Realflight Lite, or G2, work with Mode 3 Transmitter?
02-21-2004 | 09:08 PM
#1
Thread Starter
Senior Member
Joined: Mar 2003
Posts: 6,544
Likes: 0
Received 0 Likes
on
0 Posts
From: Garland, TX
Will Realflight Lite, or G2, work with Mode 3 Transmitter?
I fly with a Futaba 6XAS set for Mode 3, which is exactly the reverse of Mode 2.
Left = Ailerons/Elevator
Right = Throttle/Rudder
My "Master" transmitter while I'm learning to fly is a 6XAS set to Mode 2.
They work together perfectly with a trainer cord.
I'm interested in Realflight, but cannot get definite info on whether my Mode 3 transmitter will work with it. Email to knife edge software has received no response.
If someone's using RF with a 6XAS, would you be willing to change your TX stick mode and test it?
Left = Ailerons/Elevator
Right = Throttle/Rudder
My "Master" transmitter while I'm learning to fly is a 6XAS set to Mode 2.
They work together perfectly with a trainer cord.
I'm interested in Realflight, but cannot get definite info on whether my Mode 3 transmitter will work with it. Email to knife edge software has received no response.
If someone's using RF with a 6XAS, would you be willing to change your TX stick mode and test it?
