MY 1ST AFPD VIDEO
#1
Thread Starter
Senior Member
Joined: Feb 2004
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
From: Bournemouth, UNITED KINGDOM
Hi all, here is my 1st afpd vid!!, still trying to work out my new vid cam and software
, its about 30 megs, the quality is a bit low as i compressed it pretty good!!, but they can only get better.
This is a quick unedited clip of me flying inclding a crash!!!!
Dont judge me to harsh
Jim.
[link=http://www.lipoflight.com/afp new cam.wmv]AFPD 1ST TEST VID[/link]
RIGHT CLICK AND 'SAVE AS'
Get it before my bandwidth is used up!!
, its about 30 megs, the quality is a bit low as i compressed it pretty good!!, but they can only get better.This is a quick unedited clip of me flying inclding a crash!!!!
Dont judge me to harsh

Jim.
[link=http://www.lipoflight.com/afp new cam.wmv]AFPD 1ST TEST VID[/link]
RIGHT CLICK AND 'SAVE AS'
Get it before my bandwidth is used up!!
#5
Senior Member
Joined: Jul 2004
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
From: stone mountain,
GA
Good news and bad news
good news:it works now but you have to save target as
bad news: it wont play past 2 seconds it will start then stop
good news:it works now but you have to save target as
bad news: it wont play past 2 seconds it will start then stop
#6
Thread Starter
Senior Member
Joined: Feb 2004
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
From: Bournemouth, UNITED KINGDOM
thats becos its still uploading my end lol give it 10 mins lol!!
As soon as the upload is done i will tell ya here
As soon as the upload is done i will tell ya here
#13
Thread Starter
Senior Member
Joined: Feb 2004
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
From: Bournemouth, UNITED KINGDOM
I'll go sit in the corner lol [
]
I think it prolly got corrupted on your 1st attempt as the file was incomplete due to the fact it was still uploading, should work this time[&:]
Jim.
]I think it prolly got corrupted on your 1st attempt as the file was incomplete due to the fact it was still uploading, should work this time[&:]
Jim.
#19
Thread Starter
Senior Member
Joined: Feb 2004
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
From: Bournemouth, UNITED KINGDOM
lol, well you seen half of it then, 4 mins left to see!!!!
Thanks USNROL, yea bcos its 8 mins long it was like...120 megs b4 i crunched it[:-], kinda grainy but not 2 bad for a 1st attempt with Beer!.
Jim.
btw did it all play for you??!!

Thanks USNROL, yea bcos its 8 mins long it was like...120 megs b4 i crunched it[:-], kinda grainy but not 2 bad for a 1st attempt with Beer!.
Jim.
btw did it all play for you??!!
#21
Thread Starter
Senior Member
Joined: Feb 2004
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
From: Bournemouth, UNITED KINGDOM
Cool, I have got a new way of recording now its like 100% better, new vid up later today!!.
I use the s-video lead form my g/card to a tv, then record the action on the tv, no flicker at all, unlike a pc.
Jim
I use the s-video lead form my g/card to a tv, then record the action on the tv, no flicker at all, unlike a pc.
Jim
#24
Junior Member
Joined: Feb 2005
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
From: , QC, CANADA
I just emailed teadly personally for the AMAZING video he made!
As I told him, I tought I knew how to control a plane in Realflight g2 , But I now understand I didnt knew **** about flying a plane!
and I would like to know from all of you (pm me ) of any good way to learn to fly an rc like teadly does? (if anyone is unimpressed of this flight for instance and does actually shows a better flight than this one!!!)
My name is max, im new to this forum I found it by googling for rc communities...
Im from montreal quebec canada. I speak both french and english, if anyone is from here, please let me know if you can show me some tricks using realflight g2!!!
lol
I'm 22 btw, I know some of you are of a "more respectable" age, but I'm not a troublemake so to say.
Nice to meet you all and once again , teadly NICE ONE! cheers
-Max
As I told him, I tought I knew how to control a plane in Realflight g2 , But I now understand I didnt knew **** about flying a plane!
and I would like to know from all of you (pm me ) of any good way to learn to fly an rc like teadly does? (if anyone is unimpressed of this flight for instance and does actually shows a better flight than this one!!!)
My name is max, im new to this forum I found it by googling for rc communities...
Im from montreal quebec canada. I speak both french and english, if anyone is from here, please let me know if you can show me some tricks using realflight g2!!!
lol
I'm 22 btw, I know some of you are of a "more respectable" age, but I'm not a troublemake so to say.
Nice to meet you all and once again , teadly NICE ONE! cheers
-Max
#25
Thread Starter
Senior Member
Joined: Feb 2004
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
From: Bournemouth, UNITED KINGDOM
Thanks Jim and max for your comments
, yup the vid quality is poor but im working on it!!, my vid cam is a few yrs old now and has no dv sockets grr!, Afp is such a great tool for learning 3d imho the best, I tried the others and don't like em!.
I am working on my VTOC entry vid this week so wish me luck [&:].
Max Welcome to RCU, if you want to get back into Rc then you have found your new home here, RCU is like the Borg!! it knows everything!! The search engine is your friend!!. Aeroflypro is where you should start looking if you want to fly 3D like in my vid and your RealFlight Tx will work with it fine
. Spend some time reading up on all the sim stuff here on RCU and get the feel for it all.
To get your skill up you Must spend loads of time flying the sim and flying at the field, there is no substitute for stick time, I'm sure you will find plenty of Canadians on here who are more than willing to lend a hand!!
Jim
, yup the vid quality is poor but im working on it!!, my vid cam is a few yrs old now and has no dv sockets grr!, Afp is such a great tool for learning 3d imho the best, I tried the others and don't like em!.I am working on my VTOC entry vid this week so wish me luck [&:].
Max Welcome to RCU, if you want to get back into Rc then you have found your new home here, RCU is like the Borg!! it knows everything!! The search engine is your friend!!. Aeroflypro is where you should start looking if you want to fly 3D like in my vid and your RealFlight Tx will work with it fine
. Spend some time reading up on all the sim stuff here on RCU and get the feel for it all.To get your skill up you Must spend loads of time flying the sim and flying at the field, there is no substitute for stick time, I'm sure you will find plenty of Canadians on here who are more than willing to lend a hand!!
Jim



