Reflex XTR interface and AFPD
08-18-2005 | 08:35 PM
#1
Reflex XTR interface and AFPD
I just got Reflex XTR and have been able to get my futaba Tx working with it.
I also have AFPD. Is it possible to use the reflex USB connector and my transmitter instead of the AFPD controller?
So far I have to say from my limited use of XTR that I like AFPD better.
Thanks,
Stuart
I also have AFPD. Is it possible to use the reflex USB connector and my transmitter instead of the AFPD controller?
So far I have to say from my limited use of XTR that I like AFPD better.
Thanks,
Stuart
08-19-2005 | 01:38 AM
#2
Senior Member
Joined: Jun 2005
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
From: Witrach, SWITZERLAND
RE: Reflex XTR interface and AFPD
Sorry, no. But if you have the AFPD controller connected, you can use your Futaba with´a third party USB interface. That works fine.
11-27-2006 | 11:30 AM
#5
Junior Member
Joined: Nov 2006
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
From: Staten Island,
NY
RE: Reflex XTR interface and AFPD
ORIGINAL: chrismarine
Please someone tell me where I can get an interface for Reflex XTR.
Please someone tell me where I can get an interface for Reflex XTR.
I am going to call them to find out more about the interface controller since I see it mentioned no where on any other site. I would use my own TX but its the one that came with my Blade CP and from what I read it is not compatible.
Tom
11-28-2006 | 06:30 PM
#6
Junior Member
Joined: Nov 2006
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
From: Staten Island,
NY
RE: Reflex XTR interface and AFPD
ORIGINAL: Tristate Heli
I have been looking for a complete package with the software and interface. I found the Reflex XTR at [link=http://www.helihobby.com/html/reflex3d.html]Heli Hobby.com[/link], they have a kit that includes a controller, or at least thats how I read it.
I am going to call them to find out more about the interface controller since I see it mentioned no where on any other site. I would use my own TX but its the one that came with my Blade CP and from what I read it is not compatible.
Tom
I have been looking for a complete package with the software and interface. I found the Reflex XTR at [link=http://www.helihobby.com/html/reflex3d.html]Heli Hobby.com[/link], they have a kit that includes a controller, or at least thats how I read it.
I am going to call them to find out more about the interface controller since I see it mentioned no where on any other site. I would use my own TX but its the one that came with my Blade CP and from what I read it is not compatible.
Tom
Response from Heli Hobby:
"That package comes with a TX that we pair with the Reflex it is a JR sport 4 channel radio"
