I have the new Reflex XTR and it is very real. It has improved my flying 10 fold. I do not mind the restrictions that it employs. What I do mind is the flying fields that they offer - it seems like they didn't have enough at the time of delivery and just went out to a bunch of different cow pastures and took some pictures coupling it with sattelite images. I am also getting bored with the planes that they offer so I went to their website and tried to download new feilds and planes but everything is in another language other than english. There are no directions on how to mesh them into my sim for the sim that I have has a bunch of non English words in it also. How do you do this? I NEED turbine jets and a P-51 ( every sim should have a giant P-51 ) I can sucessfully download these items but I do not know how to set them in my sim.

P.S. THE HELIS ARE GREAT !!!!!!

same problem, someone please help

I use this site for my add-ons. http://www.rc-sim.de/index_en.htm
You have to register, but it free. It took a bit of time to figure out where and how to unzip the files into the correct folders. I'm sure more info can be found on other forums/posts. For the most part, I have found that 95% of what I have down loaded and installed has worked great. Most issues are with flying sites. I probable have 300+ aircraft, 100+ heli's and 100+ places to go flying.

http://home.comcast.net/~hfritze/

http://www.rchelicopterweb.com/Simul...Simulators.htm


if you're tired of cow pasture try here.
http://www.flickr.com/groups/equirectangular/pool/
You might need to use a little bit of noodles.
some people upload these photos bigger than 8160x4080
resize them to 8160x4080 then crop off the bottom of the photo to 8160x3060