FSOne flight simulator
04-08-2009 | 10:41 AM
#1
Thread Starter
Member
Joined: May 2004
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
From: RomaRM, ITALY
FSOne flight simulator
Who can help with instructions to edit my JRXP9303 Tx in the FsOne sim? I find it quite confusing since they indicate 7 axis... to start with.
Will appreciate all suggestions.
Thanks, stay cool.
Dino
Will appreciate all suggestions.
Thanks, stay cool.
Dino
05-16-2009 | 11:20 PM
#3
My Feedback: (15)
Joined: May 2002
Posts: 1,023
Likes: 0
Received 0 Likes
on
0 Posts
From: Catoosa,
OK
RE: FSOne flight simulator
Mark,
I tried to PM you, but you don't have the feature turned on. I wanted to ask where you fly in San Antonio? The last I heard, the Propbusters had lost both fields, the one behind the H.E.B. at Bandera Rd., and the one at the landfill. Is there another established flying site there? I frequent San Antonio often to visit my folks, and I like to travel with some small planes and a heli or two. Thanks,
Jesse
I tried to PM you, but you don't have the feature turned on. I wanted to ask where you fly in San Antonio? The last I heard, the Propbusters had lost both fields, the one behind the H.E.B. at Bandera Rd., and the one at the landfill. Is there another established flying site there? I frequent San Antonio often to visit my folks, and I like to travel with some small planes and a heli or two. Thanks,
Jesse
05-17-2009 | 12:23 AM
#4
Senior Member
My Feedback: (3)
Joined: Oct 2004
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
From: San Antonio,
TX
RE: FSOne flight simulator
"I wanted to ask where you fly in San Antonio?"
Hi whstingdeath
I live on the North side (North of 1604 off 281 If you are familiar with the area) I normaly fly at a club on the South side of Austin,Hill Country Aeromodellers,off of I-35. Very nice field and people paved runway and taxiways. It takes me about an hour and 15 minutes to get there.
http://www.hcamonline.org/
I recently joined a club on the west side of town (out by Lackland AFB),Alamo Radio Control Society I have only been there twice but it is also a very nice facility with great people. They have a new paved runway that is very nice. It takes me about 45 Min to get there if I go at off peak times when I hit traffic it probably takes an hour.
http://alamoradiocontrolsociety.com//page21.html
You are correct the PropBusters are no longer behind the HEB on Bandera I beleive they relocated but I do not recall where.
You are sure welcome to come out to either of the fields I mentioned both fields welcome visitors as long as they have a AMA card.
Sorry about my PM featured being turned of - I received some inappropriate emails from an RC Universe and decided to just turn it off. If your PM is active I will send you my email address - if you have questions about flying here in SA feel free to contact me.
Mark
Hi whstingdeath
I live on the North side (North of 1604 off 281 If you are familiar with the area) I normaly fly at a club on the South side of Austin,Hill Country Aeromodellers,off of I-35. Very nice field and people paved runway and taxiways. It takes me about an hour and 15 minutes to get there.
http://www.hcamonline.org/
I recently joined a club on the west side of town (out by Lackland AFB),Alamo Radio Control Society I have only been there twice but it is also a very nice facility with great people. They have a new paved runway that is very nice. It takes me about 45 Min to get there if I go at off peak times when I hit traffic it probably takes an hour.
http://alamoradiocontrolsociety.com//page21.html
You are correct the PropBusters are no longer behind the HEB on Bandera I beleive they relocated but I do not recall where.
You are sure welcome to come out to either of the fields I mentioned both fields welcome visitors as long as they have a AMA card.
Sorry about my PM featured being turned of - I received some inappropriate emails from an RC Universe and decided to just turn it off. If your PM is active I will send you my email address - if you have questions about flying here in SA feel free to contact me.
Mark
