G2 Interface controller (help)
07-14-2003 | 02:27 AM
#1
Thread Starter
Member
Joined: Jul 2003
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
From: Sierra MAdre, CA
G2 Interface controller (help)
A friend of mine let me try out his real flight g-2 for a couple of weeks while he is on vacation, I am going to purchase it when he gets back but I decided to try it out to see if I like it. Unfortunatley he didn't leave me with the Interface contrller. I asumed i could use my Futaba, but after install is done it ask me to connect the interface controller. Is there any way around this? 
07-14-2003 | 04:29 PM
#4
Member
Joined: Mar 2003
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
From: AZ
G2 Interface controller (help)
Yes you are able to use your own controller. But u need to have the interface controller that comes with the software then connect the controller to your radio using the included trainer jack adapter thing
07-14-2003 | 04:46 PM
#5
Thread Starter
Member
Joined: Jul 2003
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
From: Sierra MAdre, CA
G2 Interface controller (help)
Ok so let me get this right.....I have a interlink cable for my Futaba to connect to the PC. Your telling me you have to connect your own transmitter to the controller that comes with G2? Why would you need both controllers? Let say I plug in the G2 controller the first time to install it then would I be able to use my Futaba? Or will I always need the G2 controller?
07-14-2003 | 04:49 PM
#6
Senior Member
My Feedback: (4)
Joined: Dec 2002
Posts: 925
Likes: 0
Received 0 Likes
on
0 Posts
From: OKC, OK
G2 Interface controller (help)
The G2 controller IS the interface. All the cable is for is to connect your TX to the G2 controller which then acts as the interface for your TX. I.E. No G2 controller, no flying. sorry dude.
