![]() |
RE: G3 multiplayer screenshots
|
RE: G3 multiplayer screenshots
ORIGINAL: STLPilot ORIGINAL: Rick Delten Hey I made a "flying lawnmower" and G3 is now selling a "flying lawnmower". I have no idea what G3's mower looks like, everyone knows how mine looks. Does anyone think that the G3 mower is going to be different than mine? |
RE: G3 multiplayer screenshots
1 Attachment(s)
Not the same ... but close.
Rick ... since your using FlyingThingZ planform on your model, I only request that you put FlyingThingZ.com clearly on the model before distribution. THANKS and I'm sure you understand why. |
RE: G3 multiplayer screenshots
ORIGINAL: STLPilot Not the same ... but close. Rick ... since your using FlyingThingZ planform on your model, I only request that you put FlyingThingZ.com clearly on the model before distribution. (I am part owner of the company) THANKS and I'm sure you understand why. Hey where did U get that pic of the mower? It sure looks ugly compared to mine and the AFPD one -doesn't it?? |
RE: G3 multiplayer screenshots
I mean if your model is going to be distributed anywhere, including any swap sites. Thanks for understanding, I'm sure you understand why.
Jim Bourke sent me that image. That is a very old version of the flying mower. |
RE: G3 multiplayer screenshots
ORIGINAL: STLPilot I mean if your model is going to be distributed anywhere, including any swap sites. Thanks for understanding, I'm sure you understand why. Jim Bourke sent me that image. That is a very old version of the flying mower. I would sooner vote for Hilary Clinton before I did anything else to help further the GreatPlanes product line! (yikes)[X(] |
RE: G3 multiplayer screenshots
Gotcha.
How did it fly? |
RE: G3 multiplayer screenshots
It flies almost identical to the one in AFPD, thats what I modelled it after. I dont have a real one and I have never actually seen a real one either. So the AFPD one was all I had to go on for flight model.
|
RE: G3 multiplayer screenshots
It should rock a little in flight. Since there are no wings to act as counter weights and has a high center of gravity. It flies like it looks. It's designed for fun and to wow audiences. It takes a better then beginner pilot to fly.
The AFPD one is slightly easier to fly then the real one, but we have a "perfect" version too. |
RE: G3 multiplayer screenshots
STL, do you have a flyable demo of your product?
|
RE: G3 multiplayer screenshots
No demo of AFPD.
I wish it was my product, I'm just the guy that sells em. PS - It's as good as everyone says. |
RE: G3 multiplayer screenshots
ORIGINAL: STLPilot No demo of AFPD. I wish it was my product, I'm just the guy that sells em. PS - It's as good as everyone says. HEHEHEHE Woops:) |
RE: G3 multiplayer screenshots
You never told me how coal will save mother earth?
Are you a coal miner? |
RE: G3 multiplayer screenshots
LOL
BTW, why would Rick have to give note of FlyingThingZ.com? Didn't the origional flying lawnmower come out as RCM plans? I can easily scratch build one. woops:) |
RE: G3 multiplayer screenshots
Woops, explain the coal thing.
STL, If everyone says that eating dirt is great, would you? |
RE: G3 multiplayer screenshots
Woops and I go waaaayyyy back. I've been trying to get that answer from Woops for a long time now. Seeing that coal is the deadliest and dirtiest form of fossil fuel waste and emissions, I just don't see how it can save mother earth. Let's not forget about the huge underground caverns they create which eventually explode underground or become flooded and kill many. Let's also point out strip mining that basically rapes mother earth of it's landscape. Did I mention the sinkholes????
I'm just really confused about it. Also if someone copies the FlyingThingZ version it's not modeled after any other airplane ever produced. Therefore it does not fall under "fair use" like common airplanes do. Mmmmmm ... dirt .... ahhhhrrrghhhghghrrgghhhhhhg |
RE: G3 multiplayer screenshots
Are you saying that it would have been illegal for me to freely distribute the "flying mower" I made without the "FlyingThingZ.com" logo on it?
|
RE: G3 multiplayer screenshots
My point is, if I can try it on my computer, and be sure that it will work and I like It, I would probably buy it. I didnt buy G3 until the demo was released.
Woops is being facetious, I wanted him to explain why he was. |
RE: G3 multiplayer screenshots
If I wanted to, I could ask you to refrain from distributing the FlyingThingZ mower, yes.
Of course I would not do so as there would be no reason to do so, unless you did not agree to plug FlyingThingZ for the usage of the shape of the aircraft. If you changed the shape of the plane, then of course there is nothing we can do about it. The shape of the FlyingThingZ mower is copyrighted. It does not fall under fair use. But afterall Rick I suspect you wouldn't hesitate to plug FlyingThingZ seeing you borrowed their aircraft shape ... why would you? Afterall we are all sharing and credit due is credit due, you wouldn't want to take credit for someone elses design. |
RE: G3 multiplayer screenshots
ORIGINAL: STLPilot If I wanted to, I could ask you to refrain from distributing the FlyingThingZ mower, yes. Of course I would not do so as there would be no reason to do so, unless you did not agree to plug FlyingThingZ for the usage of the shape of the aircraft. If you changed the shape of the plane, then of course there is nothing we can do about it. The shape of the FlyingThingZ mower is copyrighted. It does not fall under fair use. But afterall Rick I suspect you wouldn't hesitate to plug FlyingThingZ seeing you borrowed their aircraft shape ... why would you? Afterall we are all sharing and credit due is credit due, you wouldn't want to take credit for someone elses design. So how would this apply to other models like an Extra or a Giles or a Shockflyer would I need to contact the respective copyright holders of each of those aircraft and ask permission? Thank god I am done contributing stuff their is just waaaaaay too much BS involved -not worth working for free anymore! Anyone from KE want to chime in on this issue????? |
RE: G3 multiplayer screenshots
ORIGINAL: STLPilot Woops and I go waaaayyyy back. I've been trying to get that answer from Woops for a long time now. Seeing that coal is the deadliest and dirtiest form of fossil fuel waste and emissions, I just don't see how it can save mother earth. Let's not forget about the huge underground caverns they create which eventually explode underground or become flooded and kill many. Let's also point out strip mining that basically rapes mother earth of it's landscape. Did I mention the sinkholes???? I'm just really confused about it. Also if someone copies the FlyingThingZ version it's not modeled after any other airplane ever produced. Therefore it does not fall under "fair use" like common airplanes do. Mmmmmm ... dirt .... ahhhhrrrghhhghghrrgghhhhhhg STLPilot, You have, yet again, proven what I post, you really don't read. So in order to educate you here, I'll quote my own post quoting your post in which I quoted a previous post on this same question: ORIGINAL: woops ..... ORIGINAL: STLPilot BTW your signature sums it all up. Coal is the dirtiest and deadliest form of pollution from and energy source in the USA. ORIGINAL: woops ORIGINAL: ckangaroo70 SAVE MOTHER EARTH!!!!! Burn coal to stay warm this winter. woops Actually Illinois stripped coal is loaded with sulpher[:'(] and not quite as friendly to the planet as the good eastern coal. Strip Mining in my area did make for some nice habitat and lakes for critters though since stripped ground is undesirable to farmers. Very few mines left in the Middle of the Country, and my father in law was lucky to retire from the mine just right before it closed due to the fact eastern coal is so much better and cleaner! :D Just wanted to put my .02 cents in on your signature! Woops:) P.S. I do know about the poor quality of coal from my wacked out(been huggin' too many trees) neighbors. .... Woops:) Woops:) edited to take out most of that old thread |
RE: G3 multiplayer screenshots
ORIGINAL: STLPilot If I wanted to, I could ask you to refrain from distributing the FlyingThingZ mower, yes. Of course I would not do so as there would be no reason to do so, unless you did not agree to plug FlyingThingZ for the usage of the shape of the aircraft. If you changed the shape of the plane, then of course there is nothing we can do about it. The shape of the FlyingThingZ mower is copyrighted. It does not fall under fair use. But afterall Rick I suspect you wouldn't hesitate to plug FlyingThingZ seeing you borrowed their aircraft shape ... why would you? Afterall we are all sharing and credit due is credit due, you wouldn't want to take credit for someone elses design. Woops:) |
RE: G3 multiplayer screenshots
1 Attachment(s)
ORIGINAL: woops LOL BTW, why would Rick have to give note of FlyingThingZ.com? Didn't the origional flying lawnmower come out as RCM plans? I can easily scratch build one. woops:) The original flying lawnmower, Dog House, and Witch were from RCM If you look at the pictures of Mower, Witch, and Flying Dog House, you will see for your self, that all we did was used the original concept. Henry and I worked countless hours redesigning our own product and to make these planes fly the way the do. Check out the video for the Flying Dog House, you will see for your self http://www.3d-nut.com/videos/doghouse.wmv as a matter of fact why don't you check out our web sight www.flyingthingz.com and if you like to find out a little [link=http://www.flyingthingz.com/about_us.html]About US[/link]. I'm sure you could easily scratch build your own Mower, but one thing for sure it's not going to happen over night. The Dog House took me over two years to get it done right. Thank you for your Time Spiro Markozanis FlyingThingZ, Inc. |
RE: G3 multiplayer screenshots
1 Attachment(s)
Yeah I was right, heres a screencap of the "Flying Mower" from AFPD and sure enough it doesnt say "FlyingThingZ.com" anywhere on the model. So why does it all of a sudden have to be on the one I made?
|
RE: G3 multiplayer screenshots
ORIGINAL: 3D Nut ORIGINAL: woops LOL BTW, why would Rick have to give note of FlyingThingZ.com? Didn't the origional flying lawnmower come out as RCM plans? I can easily scratch build one. woops:) The original flying lawnmower, Dog House, and Witch were from RCM If you look at the pictures of Mower, Witch, and Flying Dog House, you will see for your self, that all we did was used the original concept. Henry and I worked countless hours redesigning our own product and to make these planes fly the way the do. Check out the video for the Flying Dog House, you will see for your self http://www.3d-nut.com/videos/doghouse.wmv as a matter of fact why don't you check out our web sight www.flyingthingz.com and if you like to find out a little [link=http://www.flyingthingz.com/about_us.html]About US[/link]. I'm sure you could easily scratch build your own Mower, but one thing for sure it's not going to happen over night. The Dog House took me over two years to get it done right. Thank you for your Time Spiro Markozanis FlyingThingZ, Inc. Thanks, Woops:) |
| All times are GMT -8. The time now is 11:36 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.