Trouble with getting 9c to work with Realflight.
 

I bought an adapter cord for my 9c to work with the USB controller, I plug everything in, extend the 9c's antenna and nothing, only the USB controller has any input. Can anyone help?

Trouble with getting 9c to work with Realflight.
 

Are you in PCM or FM mode? Just today I read where you have to be in FM mode.

If that is not the problem, I also read where you might have to change your port settings in your CMOS setup.

Are you using serial or parallel?

Glenn.

Trouble with getting 9c to work with Realflight.
 

It's a USB Controller, my transmitter is in PPM not PCM. Still not working.

Thanks for the help though.

Trouble with getting 9c to work with Realflight.
 

A couple of things to look at:

Have you changed to the Interface Mode in the controller calibration screen? If the InterLink is still controlling the aircraft it sounds as if it's still in the InterLink controller joystick mode.

Go to Options ---> Controller Calibration --->Controller Type and change it to Interface Mode

Alternatively, have you turned the power 'On' in the 9c?

Marko

Trouble with getting 9c to work with Realflight.
 

I did have the power on, but I don't know if I checked the options menu. I will check that and get back you.