I need a gearbox
04-16-2007, 09:58 PM
#1
Senior Member
Thread Starter
Join Date: Apr 2003
Location: chatsworth,
CA
Posts: 4,643
Likes: 0
Received 0 Likes
on
0 Posts
I need a gearbox
Hello guys,
I need to find a very unusual gearbox, one that will accept two motors about 3" in diameter each and a combined input wattage of about 1000 watts. 8mm input gears are preferable, but that can be modified. The gear ratio is not too important, becase anything from 1:1-2:1 will work, and i can swap the gears around as necessary to acheive this, or make a few of the gears myself. basically i just need a platform with which to work, because i dont want to do it all myself from scratch. i'm too lazy
Any ideas?
-Clam
I need to find a very unusual gearbox, one that will accept two motors about 3" in diameter each and a combined input wattage of about 1000 watts. 8mm input gears are preferable, but that can be modified. The gear ratio is not too important, becase anything from 1:1-2:1 will work, and i can swap the gears around as necessary to acheive this, or make a few of the gears myself. basically i just need a platform with which to work, because i dont want to do it all myself from scratch. i'm too lazy
Any ideas?
-Clam
