engine
 

anyone knows if theses engines are good ?


The brand-new GP460 engine is a 45.7cc (42mm bore, 33mm stroke) performance machine. Designed after the high-revving Zenoah RC style motors, it features a 4 transfer port 42mm cylinder, high-performance case pulsed Walbro carburetor (19mm bore, 15mm venturi, independent high and low jets) "hemi"-style combustion chamber, and full-circle crankshaft. The combustion chamber clearances have been improved for better thermal control, resulting in more uniform thermal expansion characteristics and reduced dynamic stress at high operating RPMs! Includes 78mm three-shoe inner clutch assembly preinstalled.
For Scooters: Stock engine on Trail Ripper GTR46, Super Go-Quad 46, SGSR46R, Trail Ripper Quad, and RIOT. Also fits GSR25, GSR26R, GSR29R, Go-Quad 25, and Super Go-Quad 30 when used with 78mm motor mount (DDM part hh551).
For R/C: Fits 78mm clutches used on many RC cars, boats, and airplanes.
Engine Stats: Displacement: 45.7cc. Power: 4.2+HP @11,000 RPM, 2.35 lb/ft torque @8,000 RPM. Fuel: 91 octane or higher mixed 25:1 with 2-stroke oil.
GP460 4.2+ HP Engine w/Inner Clutch - $255.00
bb882 - GP460 w/Red Filter bb883 - GP460 w/Blue Filter bb884 - GP460 w/Chrome Filter bb885 - GP460 w/Black Filter bb886 - GP460 w/Purple Filter Quantity:Add to Cart

RE: engine
 

Will that engine actually fit on an rc car?

RE: engine
 

In one of Kenazzo's monster cars, for sure. [&:]

RE: engine
 

lol but is it good to go fast ? ive seen them on videos they go good with a person on board

RE: engine
 

on my 105 inch dragster yes lol

RE: engine
 

It has the power, if you gear it properly I'm sure it can do the job. Anything that can move a 160+ lb person can be geared to move an RC car pretty fast.

RE: engine
 

Those are the engines thay use on gopeds. They are basicly a scaled up version of the g260rc engines, and produce ALOT of power. Beware of the pullstarts though [:@]

RE: engine
 

so i guess it is good ? i wont be on the car so thats less wait lol

RE: engine
 

thanks mate say my dragsterweighs 20 kilos with the engine will the engine be good for it ? im just saying 20 kilos i dont know how much it ways yet

RE: engine
 

Yes, that engine will be perfect for your dragster [8D] The guys that use them on gopeds with a decent pipe have a hard time keeping the front wheel on the ground.

RE: engine
 

thanks mate i think they are 4 stroke not 2 stroke ? is it better to have a 2 stroke or 4 stroke engine ? thanks guys for all of your help

RE: engine
 

Nope they are 2-smoke.

RE: engine
 

thanks sam ill check it out again and decied

RE: engine
 

my fully modded baja5b is 19kilos but my style engine mods makes it move like an angry beast

RE: engine
 

were can i find it from ? thanks for all your help

RE: engine
 

over priced.
you can get a 49cc scooter and take the engine out instead.

RE: engine
 

i bought a mini moto engine big bore 55cc with the pipe it cost me 188 euros for all including the postage if you want to see a picture of it go to my other post 91 inch dragster thanks