Installing Pushrods
10-10-2003 | 04:48 PM
#1
Thread Starter
Joined: Sep 2003
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
From: Stuttgart, GERMANY
Installing Pushrods
I recently bought an ARF DLG with a very narrow CF tail. I would like to install the pushrods so there is very little play in them. Any suggestions on how to get the sleeves to stick to the inside walls of the tail? Any help would be appreciated.
Shoe
Shoe
10-10-2003 | 04:57 PM
#2
Senior Member
Joined: May 2002
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
From: opononi, NEW ZEALAND
RE: Installing Pushrods
Take a look at my favourite sites - charlesriverrc.org and the allegro e-lite interest group.
The Allegro uses teflon tube carriers on the outside of the carbon tube to carry 1/32 wire pushrods. Works for them -
Might also work with 2mm cf rod as well for a further small weight saving.
The Allegro uses teflon tube carriers on the outside of the carbon tube to carry 1/32 wire pushrods. Works for them -
Might also work with 2mm cf rod as well for a further small weight saving.
