blade sr
12-23-2010 | 06:56 AM
#1
Thread Starter
Junior Member
Joined: Sep 2010
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
From: north liberty,
IN
blade sr
I cant get my blade sr to leave the ground.the blades spin real fast but I dont have any lift.I have no idea why its doing it.please help</p>
12-23-2010 | 07:45 AM
#2
Senior Member
Joined: Jan 2010
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
From: Woonsocket, RI
RE: blade sr
Does the blade pitch change when moving thethrottle stick.
Watch the swash plate and what its doing.
I think it should go up when the throttleis moved up.
Maybe the pitch channel is reversed.
Also watch the servos all should move in sinc, in the same direction.
What TX are you using?
Watch the swash plate and what its doing.
I think it should go up when the throttleis moved up.
Maybe the pitch channel is reversed.
Also watch the servos all should move in sinc, in the same direction.
What TX are you using?
