Blade SR reassembly
#1
Member
Thread Starter
Join Date: Jan 2011
Location: Omaha, NE
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Blade SR reassembly
I bought a blade SR a few months ago and I have crashed and fixed it several times. My question is this....Is there anything that I need to make sure I "recalibrate" each time I crash or anything specific I should be watching for? I broke the frame so I had to totally strip it down.
#2
Senior Member
Join Date: Nov 2007
Location: Oxford,
ME
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
RE: Blade SR reassembly
Mark your servo wires so you know what plugs into what, the manual does not show a wiring diagram.
if you have a camera take lots of pics before you disasemble, it will be easier to reasemble if you have good documentation. the manual is nice but some times a picture is invaluable.
if you have a camera take lots of pics before you disasemble, it will be easier to reasemble if you have good documentation. the manual is nice but some times a picture is invaluable.