Jr Heli question...
#1
Junior Member
Thread Starter
My Feedback: (1)
Join Date: Nov 2002
Location: walnut creek,
CA
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Jr Heli question...
i just got an ergo (i think) and was wondering what are the "must have" upgrades for this heli? it's a CCPM model... i went to a local field and saw some pro's doing some 3D flyin, what a rush!
i'm far from that but i'd like to know what people have found to be upgrades that were we'll worth the money.
thank!
i'm far from that but i'd like to know what people have found to be upgrades that were we'll worth the money.
thank!
#2
Senior Member
Join Date: Dec 2001
Location: Fredericton, NB, CANADA
Posts: 2,587
Likes: 0
Received 0 Likes
on
0 Posts
RE: Jr Heli question...
You don't have to upgrade anything right now. That heli will work fine for a beginner just the way it is. Spend your money on fuel and learn to fly the heli, then maybe get some upgrades.
#3
RE: Jr Heli question...
I agree. I have an Ergo 30 CCPM and it is brilliant. Only upgrade you may need is a bit of sticky tape wrapped around the boom to stop it slipping in the mainframe and loosening the tail belt.
Apart from that it is a fab machine!
I don't know what model you have, but the 30 model is a little underpowered for 3D (you can get an Ergo 46 or an Ergo 60 too) but it will fly normal aeros fine.
Apart from that it is a fab machine!
I don't know what model you have, but the 30 model is a little underpowered for 3D (you can get an Ergo 46 or an Ergo 60 too) but it will fly normal aeros fine.