Problems tuning engine
#1
Junior Member
Thread Starter
Join Date: Oct 2003
Location: Leicester, UNITED KINGDOM
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Problems tuning engine
Help!.
I have a new Robbe Ornith with a Magnum 46 XLS. The engine is in the heli, and the heli is tied to the workbench. I cannot seem to get the mixture right. It is fairly goog from idle up to mid throttle, but when I go to about 60% throttle, the engine gradually picks up speed, goes out of control, then cuts out. The mixture seems to be quite rich as there is lots of smoke, but it seems to behave like it is too lean and is over-heating
Any advice would be appreciated......
I have a new Robbe Ornith with a Magnum 46 XLS. The engine is in the heli, and the heli is tied to the workbench. I cannot seem to get the mixture right. It is fairly goog from idle up to mid throttle, but when I go to about 60% throttle, the engine gradually picks up speed, goes out of control, then cuts out. The mixture seems to be quite rich as there is lots of smoke, but it seems to behave like it is too lean and is over-heating
Any advice would be appreciated......