gain and trim
#1
Member
Thread Starter
Join Date: Dec 2004
Location: Englandengland, UNITED KINGDOM
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
gain and trim
where should the gain control be and the trim control be set to. i am having problems with it spinning when the main blades get up to a faster speed. the tail rotor is pushed in properly.
hope you can help
chudd
edit: i have a Twister
hope you can help
chudd
edit: i have a Twister
#2
Senior Member
Join Date: Dec 2001
Location: Fredericton, NB, CANADA
Posts: 2,587
Likes: 0
Received 0 Likes
on
0 Posts
RE: gain and trim
Gain control is on the gyro or radio, depending on what gyro you have. Trim is on the radio. What do you have for a heli and what gyro and radio are you using?
#4
Member
Join Date: Dec 2004
Location: ocala,
FL
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
RE: gain and trim
you have gainand proportion. gain is how fast it will react to a change,prop. is how much power goes to the tail motor in proportion to the main motor. what worked for me was 50% on gain & slowly bring up prop. till it quits spinning.each helio is a little diff but this should get you started.