simulator trouble help!
#4
Junior Member
Joined: May 2005
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
From: Fallon,
NV
go to analog controls and then select mapping/calibration then you have to play with (inv) check mark spots and move the numbers around on the left a little bit. I have a 4ch remote and have it set from top to bottom 4-3-1-2-4-3-1-2 and check marks but the tail, roll, pitch in the (inv) box.. That works great for me!! Hope you get it down. If it works or don't let me know... BOL...



