Question: Hover time
07-01-2003 | 01:50 PM
#1
Thread Starter
Senior Member
Joined: May 2003
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
From: London,
Question: Hover time
Hi 
I'm running a Century Hawk 3 with an MDS 38H engine.
On a full tank of fuel, I am getting 18 minutes airtime (mainly hovering plus a few full power climb outs). Using CoolPower 15%. No landings.
Is this about right or am I slightly lean?
On the "touch test" my finger burns after about 2-3 seconds, so I think its ok.
My headspeed is 1500 rpm, standard blades.
Any comparisons would be welcome
I'm running a Century Hawk 3 with an MDS 38H engine.
On a full tank of fuel, I am getting 18 minutes airtime (mainly hovering plus a few full power climb outs). Using CoolPower 15%. No landings.
Is this about right or am I slightly lean?
On the "touch test" my finger burns after about 2-3 seconds, so I think its ok.
My headspeed is 1500 rpm, standard blades.
Any comparisons would be welcome
