i bought my first helicopter today a raptor 30 V.2 i also bought a 6 channel futaba computer radio but heres where i think i goofed i got a JR PIEZO G460T GYRO the guy at the hobby shop said it would be alright to use but when i was reading through the instructions for the gyro it says its made to work perfectly with JR radios and might not work correctly with other radios is this true do i need to take this gyro back and get another or will this one be alright any help would be greatly appreciated thanks.

I don't know about the hobby shop, but you mite find someone here that lives close to you that will give you a hand.

http://www.p-locate.rc-helipad.com/

thanks for the info charlie ill have to check it out

Not sure about the g460 but I have used a futaba 502 gyro
with a JR 652 radio and it worked fine.
But if you where to take the g460 back I would say go for the
Futaba 401 Its a good gyro and you will find a lot of help here
on how to set it up

And get the servo that goes with it.

thanks so far guys but im still wondering if the g460 will work does anyone know for sure thanks.

I Read the manual on your G460 and YES it will work with your
Radio.
I think it says it mite not work with some radios is because you
need a free channel to use for the gain settings wich is usually
done on channel six.
I didn,t see any way to set the gain on the gyro itself and you need to be able to set the gain in normal and hh mode.