help - simple
#1
Thread Starter
Junior Member
Joined: Apr 2010
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
From: tempe, AZ
Beginner - just bought a rc 9057.. flew it once .. now there appears to be no signal between controller and helicoper??? any suggestions
Thanks
Thanks
#4
Senior Member
Joined: Jan 2010
Posts: 381
Likes: 0
Received 0 Likes
on
0 Posts
From: Flanders,
NJ
when starting your heli you have to follow a specific procedure:
1) turn on transmitter
2) Power up helicopter and wait for it to bind with transmitter
Note: I know some helicopters need you to power up the helicopter with in 10 seconds of turning on the transmitter.
also before powering up always make sure your throttle stick is all the way down.
1) turn on transmitter
2) Power up helicopter and wait for it to bind with transmitter
Note: I know some helicopters need you to power up the helicopter with in 10 seconds of turning on the transmitter.
also before powering up always make sure your throttle stick is all the way down.



