Help needed to set up DX7
 

Can some guide me through setting the DX7 so that 401 Gyro runs on HH only. I am not up to the stage where I can do 3D yet and I dont Know how to program the DX7 for normal flight. I have a Hurricane 550 and fatuba 401 gyro. I woud like to set up the DX7 for normal flight with NO 3D functions until I can fly the machine properly.
Any help would be appreciated.
PEZ

RE: Help needed to set up DX7
 

Hey bro,

If you set the gyro gain to anything above 50% it will be in HH mode. On the DX7 set it to 72% as a starting point.

You should watch the video's on www.helifreak.com

There's one for setting up the DX7 for a trex 450...here's the link: http://www.helifreak.com/showthread.php?t=28681

Good luck!
Skarn