Help needed to set up DX7
05-03-2008 | 08:23 PM
#1
Thread Starter
Junior Member
Joined: Oct 2007
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
From: Penrith, AUSTRALIA
Help needed to set up DX7
Can some guide me through setting the DX7 so that 401 Gyro runs on HH only. I am not up to the stage where I can do 3D yet and I dont Know how to program the DX7 for normal flight. I have a Hurricane 550 and fatuba 401 gyro. I woud like to set up the DX7 for normal flight with NO 3D functions until I can fly the machine properly.
Any help would be appreciated.
PEZ
Any help would be appreciated.
PEZ
05-03-2008 | 10:26 PM
#2
Senior Member
Joined: Jan 2007
Posts: 1,047
Likes: 0
Received 0 Likes
on
0 Posts
From: Pasadena,
MD
RE: Help needed to set up DX7
Hey bro,
If you set the gyro gain to anything above 50% it will be in HH mode. On the DX7 set it to 72% as a starting point.
You should watch the video's on www.helifreak.com
There's one for setting up the DX7 for a trex 450...here's the link: http://www.helifreak.com/showthread.php?t=28681
Good luck!
Skarn
If you set the gyro gain to anything above 50% it will be in HH mode. On the DX7 set it to 72% as a starting point.
You should watch the video's on www.helifreak.com
There's one for setting up the DX7 for a trex 450...here's the link: http://www.helifreak.com/showthread.php?t=28681
Good luck!
Skarn
