need shuttle help
09-06-2003 | 07:30 PM
#1
Thread Starter
Joined: May 2003
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
From: Herts, UNITED KINGDOM
need shuttle help
im just finishing my shuttle and im inserting gyro/radio now in the manual it sais to reverse the gyro when using futaba but my gyro dosent have reverse do i just fit it upside down as i did in the caliber gyro is a csm 180
09-16-2003 | 04:48 PM
#2
Member
My Feedback: (6)
Joined: May 2002
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
From: Montezuma, GA
RE: need shuttle help
yes, you can install it upside-down to reverse it. Or, if you are using a tail boom mount for the rudder servo, you can move the pushrod to the opposite side of the servo wheel, then reverse the servo.
Either way will work.
Either way will work.
