Problems with E-Flite
08-20-2006 | 06:17 PM
#1
Thread Starter
Senior Member
Joined: Feb 2006
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
From: Denver,
CO
Problems with E-Flite
NOT AGAIN lol
Well, for my blade CX, cant do nothing. Broke. I don't even know what it is! I'm done trying and trying to fix it! DONE i tell you! Can i call &/or ship it to horizon hobby to have them fix it (for free or a price, i really don't care)?
defective tail motorfor E-Flite blade CP
Well, while i was flying, the tail motor just STOPPED and it spun out of control.
I went to the hobby shop. They were out of stock. Theres like 6 people needing it too, not including me!
Is there any other kind of motor from a different company that would work?
Well, for my blade CX, cant do nothing. Broke. I don't even know what it is! I'm done trying and trying to fix it! DONE i tell you! Can i call &/or ship it to horizon hobby to have them fix it (for free or a price, i really don't care)?
defective tail motorfor E-Flite blade CP
Well, while i was flying, the tail motor just STOPPED and it spun out of control.
I went to the hobby shop. They were out of stock. Theres like 6 people needing it too, not including me!
Is there any other kind of motor from a different company that would work?
08-20-2006 | 07:57 PM
#2
Senior Member
Joined: Sep 2002
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
From: Somewhere in the Adirondacks,
NY
RE: Problems with E-Flite
Have you seen this yet? It might be what your looking for.
[link]http://bladecprepair.com/man_tr_dd_conversion.html[/link]
[link]http://bladecprepair.com/man_tr_dd_conversion.html[/link]
08-21-2006 | 01:54 PM
#3
Thread Starter
Senior Member
Joined: Feb 2006
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
From: Denver,
CO
RE: Problems with E-Flite
i forgot about this awesome site.
this is PERFECT!
PERFECT I TELL YOU!
and i found the problem on the BLADE CX, so read up if u have this problem!
Sometimes you gotta replace the Lower blade holder thing, cuz after a while the screw holes get all destroyed! that was all it was!
IVE NEVER HAD IT HOVER SO PERFECTLY BEFORE! so im ok.
ill be ABSOLUTELY shure to get that tail rotor upgrade!
this is PERFECT!
PERFECT I TELL YOU!
and i found the problem on the BLADE CX, so read up if u have this problem!
Sometimes you gotta replace the Lower blade holder thing, cuz after a while the screw holes get all destroyed! that was all it was!
IVE NEVER HAD IT HOVER SO PERFECTLY BEFORE! so im ok.
ill be ABSOLUTELY shure to get that tail rotor upgrade!
08-21-2006 | 02:19 PM
#4
Thread Starter
Senior Member
Joined: Feb 2006
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
From: Denver,
CO
RE: Problems with E-Flite
Heres another question, about the BLADE CX.
What kind of paint will go on the body?
I tried minitures paint, and primer(which ate it away) and none works. id like some help plz
What kind of paint will go on the body?
I tried minitures paint, and primer(which ate it away) and none works. id like some help plz
08-24-2006 | 12:17 PM
#5
Senior Member
Joined: May 2006
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
From: Dayton ,
OH
RE: Problems with E-Flite
CXela22,
I used a Krylon spray paint that was designed to bond to plastics to paint my Blade CP canopy and it works great. All i did was mask off the windshield and shoot.
I carefully peeled off the factory decals, painted it, let it dry, then stuck the decals back on. I am really happy with the paint and it turned out really nice.
You can see the results in my gallery if you like.
Crash B.
I used a Krylon spray paint that was designed to bond to plastics to paint my Blade CP canopy and it works great. All i did was mask off the windshield and shoot.
I carefully peeled off the factory decals, painted it, let it dry, then stuck the decals back on. I am really happy with the paint and it turned out really nice.
You can see the results in my gallery if you like.
Crash B.
