RCE-500x gyro setup
11-09-2007 | 05:18 PM
#1
Thread Starter
Joined: Dec 2001
Posts: 570
Likes: 0
Received 0 Likes
on
0 Posts
From: Quebec City,
QC, CANADA
RCE-500x gyro setup
I'm trying to setup a friend's T-Rex 450 with a RCE-500x gyro, and s75 tail servo.
I found an online manual for the gyro ( if you can call it a manual...), and there's much info about setting up the gyro. I connected the aux channel (gain) on the proper channel, and can't find a way to make the tail flyable.
So how must I setup that gyro? In which position must the mechanical gain adjustment be positionned to be able to adjust the gain via the TX? Etc...
Thank you!
I found an online manual for the gyro ( if you can call it a manual...), and there's much info about setting up the gyro. I connected the aux channel (gain) on the proper channel, and can't find a way to make the tail flyable.
So how must I setup that gyro? In which position must the mechanical gain adjustment be positionned to be able to adjust the gain via the TX? Etc...
Thank you!
11-09-2007 | 05:48 PM
#2
Thread Starter
Joined: Dec 2001
Posts: 570
Likes: 0
Received 0 Likes
on
0 Posts
From: Quebec City,
QC, CANADA
RE: RCE-500x gyro setup
Cool! I just found a complete manual at this address: http://www.align.com.tw/html/en/c_rindexe.htm
The manual on Horizonhobby website isn't complete.
But still interested in hearing about your setups....
The manual on Horizonhobby website isn't complete.
But still interested in hearing about your setups....
