"When i power up reciever the alieron servo pulls up in the wrong direction for a split second then drops back,after that the swash goes through the motions of up/down/up with green light on 3 G module,the heli flys great and i have no problems after that.Then i can switch on later and everything is normal with alieron servo behaving itself.I have set up fail safe by re binding transmitter to rec after setting up flybarless 3G.Is this a problem or normal?And if this not mean't to operate like this any sugestions to fix it please?"

I took this from a thread on Helifreak that had no responses.. I have a similar thing happening with my new 700. I just want to know if this is normal? My aileron servo kicks down for a second too, and then when the swashplateinitializes with the movement up and down its nice and level.. I think the kick down at the beginning is just the radio and receiver not binding as quick as the 3G system would like.. am I right?<br type="_moz" />

I have the 700e 3G and it does not do that. It powers on then does the up down a couple times and then centers itself. You are not supposed to touch the sticks until after it has initialised.

Yes, I know.... it flew fine today, except for a few bobs.. but I think the problem atinitializationis caused simply by the radio andreceiver not connecting quickly enough.If I leave the radio (Spektrum DX7) on for like ten seconds and then power on the heli, I have no problems at all. So I hope I am right about the radio lol.

It takes the transmitter a few seconds to select two channels, then another few seconds for the system to link. I would center everything and put the throttle at low and rebind and it probably wont do it any more.

Thank you for theassistance guys : ) That problem is now fixed, now I'm waiting on a new torque tube from readyheli, as the one that came with the kit had .011 of runoff : /