TAIL NOT HOLDING IN FLIPS
#1
Thread Starter
My Feedback: (14)
Join Date: Apr 2003
Location: Bowling Green,
KY
Posts: 1,326
Likes: 0
Received 0 Likes
on
0 Posts
TAIL NOT HOLDING IN FLIPS
Tail swings to the right when I do flips. This is new, with no changes in setup.
Raptor 50 SE, O.S. 50, 401 gyro. Head speed governed to 2000. One day I was doing nice flips, next day it consistently lost heading hold during flips. I can jam the collective to full positive from a hover and rocket straight up with solid tail hold. But not during a flip. Any suggestions?
Raptor 50 SE, O.S. 50, 401 gyro. Head speed governed to 2000. One day I was doing nice flips, next day it consistently lost heading hold during flips. I can jam the collective to full positive from a hover and rocket straight up with solid tail hold. But not during a flip. Any suggestions?
#5
Thread Starter
My Feedback: (14)
Join Date: Apr 2003
Location: Bowling Green,
KY
Posts: 1,326
Likes: 0
Received 0 Likes
on
0 Posts
RE: TAIL NOT HOLDING IN FLIPS
OK, I have found the main blades very slight out of track, one turn required at the swash end made for perfect. Turned the gyro gain from 50 to 75 and have no tail wagging. made these adjustments at home. Will see what happens when I get to the field.
Also noticed what sounds like a substantial increase in head speed when collective is pulled back to mid stick. With my multi gov this should not be. I'll study this some. Any more suggestions?
Also noticed what sounds like a substantial increase in head speed when collective is pulled back to mid stick. With my multi gov this should not be. I'll study this some. Any more suggestions?