I have a skymaster F18 that I need the proper throws for all surfaces including flaps and Best CG for airplane. If anybody can help please email me or post on thread thanks. [email protected]

[link]http://www.skymasterjet.com/arf18e.htm[/link]

Hi

Elevators - 40-50mm
Ailerons - 15mm
Flaps at take of - 20-25mm
Flaps at landing - 50-60mm

CG - 140 to 150mm from leading edge

NEVER take off without flaps and increase the front leg lenght to improve AOA

Good luck

Nuno

Were is the zero point for the elevators and do you need elevator when flaps are extended? Thanks

Hi

It is at 0ΒΊ regarding wings

You do need a bit of up elevator with full flaps. Arround 3-5mm is good

Good luck

[link]http://www.rcuniverse.com/forum/m_4592215/anchors_10255264/mpage_2/key_/anchor/tm.htm#10255264[/link]

Read this.

Regards Peter