Deflating a Digitech Pro Lynx wheel.....
06-06-2011 | 03:49 AM
#1
Thread Starter
Senior Member
Joined: Sep 2007
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
From: Smedjebacken, SWEDEN
Deflating a Digitech Pro Lynx wheel.....
I had to pump a bit more air into my Pro Lynx mains. But unfortunately they had too much, so the diameter increased too much to get into the wheel well. So now I´ve got to let out a bit of air to get enough room.......etc
I know, I have seen how to deflate the wheels somewhere here in the forums, in connection with Boomerang jets...but where? Sandor from Digitech enclosed a "how to" manual, but I can´t find it. Someone, who can help...?
/Pete
I know, I have seen how to deflate the wheels somewhere here in the forums, in connection with Boomerang jets...but where? Sandor from Digitech enclosed a "how to" manual, but I can´t find it. Someone, who can help...?
/Pete
06-06-2011 | 04:36 AM
#2
RE: Deflating a Digitech Pro Lynx wheel.....
Just undo the main wheel bolts a little and the air will escape, sooner the better as the tyres can stretch a bit if over inflated,
Gary.
Gary.
06-07-2011 | 08:18 AM
#5
Senior Member
Joined: May 2002
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
From: Palermo, ITALY
RE: Deflating a Digitech Pro Lynx wheel.....
ORIGINAL: petera38
I had to pump a bit more air into my Pro Lynx mains. But unfortunately they had too much, so the diameter increased too much to get into the wheel well. So now I´ve got to let out a bit of air to get enough room.......etc
I know, I have seen how to deflate the wheels somewhere here in the forums, in connection with Boomerang jets...but where? Sandor from Digitech enclosed a ''how to'' manual, but I can´t find it. Someone, who can help...?
/Pete
I had to pump a bit more air into my Pro Lynx mains. But unfortunately they had too much, so the diameter increased too much to get into the wheel well. So now I´ve got to let out a bit of air to get enough room.......etc
I know, I have seen how to deflate the wheels somewhere here in the forums, in connection with Boomerang jets...but where? Sandor from Digitech enclosed a ''how to'' manual, but I can´t find it. Someone, who can help...?
/Pete
here it's the manual...
[link=http://www.readytowin.org/Download/Manuali/Digitech_Turbines/Wheels and tyres Inflating-Deflating.pdf]Wheels and tyres Inflating-Deflating[/link]
Best regards
06-07-2011 | 10:27 AM
#6
Thread Starter
Senior Member
Joined: Sep 2007
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
From: Smedjebacken, SWEDEN
RE: Deflating a Digitech Pro Lynx wheel.....
Hi Salvatore,
Thanks for posting the manual. This was exactly the one I tried to find. On digitech´s page, nothing related to Jets, neither prolynx gear exists anymore. I know that Ali has taken over the rights and dealership for prolynx...but they did not have it! Never had to deflate wheels...
they said!
/Pete
Thanks for posting the manual. This was exactly the one I tried to find. On digitech´s page, nothing related to Jets, neither prolynx gear exists anymore. I know that Ali has taken over the rights and dealership for prolynx...but they did not have it! Never had to deflate wheels...
they said!/Pete
