Crow in a 12 X
10-02-2011 | 06:25 PM
#2
My Feedback: (251)
RE: Crow in a 12 X
HI, with a JR12x, first you must mate the ail. One side uses ail. ,the other side, uses a free channel in # 22( wing type)
Second, go to program. mix, 4, is good
third, use Flap to FPRN
I have point -L in=0 out=+69
point-1= in=50 out=0
point-h=in=100 out =0
i get about 5/8'' up crow with full flaps
Rcpete
Second, go to program. mix, 4, is good
third, use Flap to FPRN
I have point -L in=0 out=+69
point-1= in=50 out=0
point-h=in=100 out =0
i get about 5/8'' up crow with full flaps
Rcpete
10-02-2011 | 07:11 PM
#3
Thread Starter
My Feedback: (1)
Joined: Sep 2004
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
From: RockinghamWestern Australia, AUSTRALIA
RE: Crow in a 12 X
Thanks Pete
Iwas ready to pull my hair out I dust deleated the thread but i will give it a try with your mix
Cheer's
Mav
Hi Pete I have droped you a PM
Iwas ready to pull my hair out I dust deleated the thread but i will give it a try with your mix
Cheer's
Mav
Hi Pete I have droped you a PM
