Classic Jets #54
#1
Thread Starter

Joined: Dec 2001
Posts: 1,249
Likes: 0
Received 0 Likes
on
0 Posts
From: Wilts, UNITED KINGDOM
The ball's rolling and everything's beginning to come together for Friday...according to my Chief Met Advisor, the forecast is ok (hope that's not the kiss of death Jase), 350 slices of thick cut pig has just been delivered and a Sainsbury's raid is planned for this evening!
More important though, who's coming and with what?
Cheers,
Dick
More important though, who's coming and with what?
Cheers,
Dick
#4
I am also looking forward to it, if my temp sensor arrives in time I will bring my F-20UF (Tigerflash), Steve Johnson is bring his one so it will be nice to see them together in the air.
#5

Dick
Can't wait...just sorting the GJC Mig 15 for its overdue maiden, usual crop...might break out the Wiggley Amps Spark as not flown it for a year!
Ah another wrestle with the 'Trust 2' A-10
Phil. I have a P-100 temp probe now...so??
Dave
Can't wait...just sorting the GJC Mig 15 for its overdue maiden, usual crop...might break out the Wiggley Amps Spark as not flown it for a year!
Ah another wrestle with the 'Trust 2' A-10

Phil. I have a P-100 temp probe now...so??
Dave
#8
Senior Member
Joined: May 2004
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
From: Horsham, UNITED KINGDOM
Looking forward to Dave flying the GJC Mig 15. Will have one for myself if it goes well. I'm bringing CARF Viper plus FB Panther for Dick.
Andy
Andy
#9
Thread Starter

Joined: Dec 2001
Posts: 1,249
Likes: 0
Received 0 Likes
on
0 Posts
From: Wilts, UNITED KINGDOM
ORIGINAL: basea
I'm bringing CARF Viper plus FB Panther for Dick.
Andy
I'm bringing CARF Viper plus FB Panther for Dick.
Andy
Mine's being worked on but, as usual, I keep having to divert to do other things. That said, I have got the engine, pod and jet pipe fitted and will be doing the elevator servos, horns and linkages tonight...doubt I'll do much more this week but at least it's started!
Cheers,
Dick
#10

My Feedback: (1)
Joined: Jan 2002
Posts: 2,370
Received 0 Likes
on
0 Posts
From: kenilworth , UNITED KINGDOM
ORIGINAL: CJ2002
The ball's rolling and everything's beginning to come together for Friday...according to my Chief Met Advisor, the forecast is ok (hope that's not the kiss of death Jase), 350 slices of thick cut pig has just been delivered and a Sainsbury's raid is planned for this evening!
More important though, who's coming and with what?
Cheers,
Dick
The ball's rolling and everything's beginning to come together for Friday...according to my Chief Met Advisor, the forecast is ok (hope that's not the kiss of death Jase), 350 slices of thick cut pig has just been delivered and a Sainsbury's raid is planned for this evening!
More important though, who's coming and with what?
Cheers,
Dick
J
#12
As I said earlier in this thread I will be at classic jets, if you have a damaged composite airframe that you would like to be repaired, whether its a wing or fuse or even a tip tank bring it along and I will access the damage and advise if it can be repaired.
You can see a couple of models i have repair on my repair section on my website one being Ali's camo Futura.
I have been trying to load some photos but for some reason it won't load even from photo bucket
You can see a couple of models i have repair on my repair section on my website one being Ali's camo Futura.
I have been trying to load some photos but for some reason it won't load even from photo bucket
#13

Nice one Phil!
Looking forward to CJ54, haven't had many outings this year due to the wether being so CRAP!
Think your right Dick, looks like its going to be OK!
JT
Looking forward to CJ54, haven't had many outings this year due to the wether being so CRAP!
Think your right Dick, looks like its going to be OK!
JT
#16

Joined: May 2011
Posts: 740
Likes: 0
Received 0 Likes
on
0 Posts
From: AltonHAMPSHIRE, UNITED KINGDOM
I'll have the "new" Kestrel in Red/White & Blue/White with me today if anyone would like to take a look see.
Look out for the DX18 base ball cap if you need nav info.
Cheers
Ian
<br type="_moz" />
Look out for the DX18 base ball cap if you need nav info.
Cheers
Ian
<br type="_moz" />
#17

A big thank you to Dick and his team for providing a never ending supply of fuel all day long for the pilots & helpers. A always a lot of work goes in to making this a successful day for everyone, even the weather gods came up with the goods.Alistair
#20

Fabulous day, big thank you to Dick's merry team. A tonne of kero was burnt today!
Don't have many photos as I was busy flying all day, I guess I flew seven different aeroplanes today inc two maiden flights (would have been three if the turbine worked!)
Really busy...maybe a little too at times
Pity I miss the next one [:@] always a great event...
Dw
Don't have many photos as I was busy flying all day, I guess I flew seven different aeroplanes today inc two maiden flights (would have been three if the turbine worked!)
Really busy...maybe a little too at times
Pity I miss the next one [:@] always a great event...
Dw
#23

And some more of the day, of particular note a very nice J.L. Yak trainer presented, and flown by Mark Hinton, fit and finish to a very high standard. Alistair



