Aviation Design rafale throws
07-06-2004 | 02:52 PM
#1
Thread Starter
Member
My Feedback: (4)
Joined: Jan 2002
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
From: plainfield,
IL
Aviation Design rafale throws
Looking for the throws and balance point on the small Aviation design Rafale. if anyone can help I would appreciate it.
Don
Don
07-06-2004 | 04:17 PM
#2
My Feedback: (540)
RE: Aviation Design rafale throws
don:
I have used ralafe too:
from the manual rafale C, M and twin seat B
for JPX T250 jet engine
Canard: 20 mm up at leading edge 5 mm down at the leading edge
Elevon: in roll 12mm up and 12 mm down
in pitch 15 mm up 15 mm down
cg is on plans i wich i dont have but i have A file in my computer here some place
see next posting
bob eckel
I have used ralafe too:
from the manual rafale C, M and twin seat B
for JPX T250 jet engine
Canard: 20 mm up at leading edge 5 mm down at the leading edge
Elevon: in roll 12mm up and 12 mm down
in pitch 15 mm up 15 mm down
cg is on plans i wich i dont have but i have A file in my computer here some place
see next posting
bob eckel
