Skymaster Hawk
#1
Thread Starter
Junior Member
Joined: Dec 2004
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
From: PELIGROSGRANADA, SPAIN
Hello again!
I´m Jose from Spain. I´ve got an Skymaster Hawk, and I´m ready again to fly her. In my first test flight I had many problems with the tail servo. There was no response from it, and I had to make an emergency landing with bad consequences for the landing gear. Now, I´ve changed the tail servo and have an JR 8511 one with double arm. Now, I feel more strenght and I think now I have enough power to make the plane to climb and change her angle with autorithy. Someone have any news or modifications in his Hawk that can sure a better flight?.
Someone have test her in the last weeks and what are your experience?.
Regards
I´m Jose from Spain. I´ve got an Skymaster Hawk, and I´m ready again to fly her. In my first test flight I had many problems with the tail servo. There was no response from it, and I had to make an emergency landing with bad consequences for the landing gear. Now, I´ve changed the tail servo and have an JR 8511 one with double arm. Now, I feel more strenght and I think now I have enough power to make the plane to climb and change her angle with autorithy. Someone have any news or modifications in his Hawk that can sure a better flight?.
Someone have test her in the last weeks and what are your experience?.
Regards
#2
Member
Joined: Jan 2005
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
From: , UNITED KINGDOM
I have flown the hawk now with one JR 8511 and it went well. But at high speed ( Full power shallow dive with P-120) I experienced a sluggish elevator. So I changed to 2 8511 now amazing elevator response all the time, all speeds.
Good luck with your flight and if you have any questions just send an email to Ali at Al's Hobbies
[email protected] He has the most experience with this model and will be happy to help.
Good luck with your flight and if you have any questions just send an email to Ali at Al's Hobbies
[email protected] He has the most experience with this model and will be happy to help.



