Go Back  RCU Forums > RC Airplanes > RC Jets
ram ECU battery cutoff voltage?? >

ram ECU battery cutoff voltage??

Community
Search
Notices
RC Jets Discuss RC jets in this forum plus rc turbines and ducted fan power systems

ram ECU battery cutoff voltage??

Thread Tools
 
Search this Thread
 
Old 01-08-2002 | 06:14 PM
  #1  
jason's Avatar
Thread Starter
My Feedback: (1)
 
Joined: Jan 2002
Posts: 2,370
Received 0 Likes on 0 Posts
From: kenilworth , UNITED KINGDOM
Default ram ECU battery cutoff voltage??

What do you guys set the ecu cut of voltage at the manual says 7.5 volts is that can not be right as the pack is 7.2 volt,can it?

jason
Old 01-08-2002 | 07:01 PM
  #2  
Laura H's Avatar
Senior Member
 
Joined: Jan 2002
Posts: 1,111
Likes: 0
Received 0 Likes on 0 Posts
From: Kent , , UNITED KINGDOM
Default ram ECU battery cutoff voltage??

Hi Jason,
On the AMT batteries you can get 9.something volts in them. When they get down to the supposed voltage under load they are nearly flat.
The ultra duo charger is worth its weight in gold!

Mick
Old 01-08-2002 | 07:39 PM
  #3  
My Feedback: (60)
 
Joined: Dec 2001
Posts: 1,481
Likes: 0
Received 0 Likes on 0 Posts
From: Mooresville, NC
Default ECU Pack

Hi Jason. 7.5 is correct. I never run my 500/750 with less than 7.8 on the ECU Pack. I usually quick charge the pack between each flight. The pack is a 7.2 volt pack but you can get well over 8.0 in them. If you do end up quick charging the pack before each flight (which is what I would recommend) make sure you do a deep cycle of the pack every so often. Quick charging often lessens the capacity of the pack hence requiring a deep cycle to get the capacity back up. Good luck!

Spencer Maze
RAM Enthusiast
Old 01-08-2002 | 07:54 PM
  #4  
jason's Avatar
Thread Starter
My Feedback: (1)
 
Joined: Jan 2002
Posts: 2,370
Received 0 Likes on 0 Posts
From: kenilworth , UNITED KINGDOM
Default ram ECU battery cutoff voltage??

thanks for the replies.
Old 01-09-2002 | 12:13 AM
  #5  
My Feedback: (92)
 
Joined: Dec 2001
Posts: 2,089
Likes: 0
Received 0 Likes on 0 Posts
From: Rosamond, CA
Default new manual

Hi Jason,

Make sure to download the latest manual from the RAM website. Lots of good stuff in there.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.