Can I use this as retract valve and door sequencer at the same time?

Does anyone have a manual for this that I can get by any chance ?





Thank you ........ Johnny Hernandez

Try this one: http://www.jet-tronics.de/seqencer_bed_neu.pdf

ummmm.....


English preffered [sm=spinnyeyes.gif]


Thanks SJ

Johnny,

Looks like the jet-tronic sequencer. It'll control both the retract valve and the door valve at the same time. Try Todd at dreamworks for the instructions.

[link]http://www.dreamworksrc.com/contact_us.htm[/link]

Duke also has this technique. [link]http://www.rcuniverse.com/forum/m_3498655/anchors_3499264/mpage_1/key_/anchor/tm.htm#3499264[/link]

That's the one SJN. It can be temperamental at times.

well...try scroll down to the bottom of the PDF, and you will find something you can read!

Thanks MOK

Hopefully Todd can scan that and post it or e-mail it.

let me know if I can be of further help Johnny...as always, nice talking to you