Does anyone have a thread on painting a jet model? Getting ready to paint my first jet and dont want to mess up.. Any help would be great.. I would prefer a thread from final sanding to primer and then painting..

http://www.rcuniverse.com/forum/m_74..._1/key_/tm.htm

Not painting, but some different build ideas

http://www.rcuniverse.com/forum/m_20..._isobar/tm.htm

Anything this guy writes related to paint:

http://www.rcuniverse.com/forum/sear...phix&top=20000

http://www.dreamworksrc.com/tips.htm

Scroll down to Painting by John Redman.

This thread is from quite a few years ago, my techniques, equipment, and skill has changed in the past years, but the fundamentals are all pretty well the same, it will give you a good starting point though.
Thanks for the Kudo's above Sean!

http://www.rcuniverse.com/forum/m_74...utorial/tm.htm


The actual tutorial starts on post 29

Here is another thread with a bunch of questions I answered, again, it's from a few years back, experience may have changed my mind on a couple things, but this is a good starting point

http://www.rcuniverse.com/forum/m_10...tm.htm#1058322

I just picked up the Jet Power "Rookie Special" magazine at a local Barnes and Noble book store. It's more like a "Getting Started in Jets" book than a magazine and they have a sixteen page article on painting a jet. Starts on setting up your gun, spraying techniques, paints, masking and then painting.

Marty